Search

Science Centre; Swedish Government Strategic Research Area in Materials Science on Advanced Functional Materials at Linkoping University [2009 ...

Keywords: Rubber and Polymeric Materials

Verbesserung der Erfassung des Verhaltens von Tragschichten ohne Bindemittel (ToB) zur Berücksichtigung in den RStO, RDO und den RSO.
Improving the characterisation of the performance of unbound granular base layers (UGLs) for consideration in german regulations (RStO, RDO and RSO)

Free access

Wellner, Frohmut / Leischner, Sabine / Spanier, Titus | ELBA - Federal Highway Research Institute (BASt) | 2022

Using automatic control systems for the start of trucks upgrading motion

Free access

Gubin Anton | DOAJ | 2019

, including illustrative material. Scientific novelty. The prerequisites for the formation of the basis for further research of the brake control ...

Uncoupled ductile fracture criterion and its application in aeronautical metallic materials

Free access

MA Hongyue / XIAO Namin / QIAN Peng et al. | DOAJ | 2021

prospecting the development trend and research direction of DFCs. According to the deformation characteristics of advanced structural metals, new ...

Publisher: Journal of Aeronautical Materials

Keywords: aeronautical metallic materials

TYPES OF STEEL AND CONCRETE COMPOSITE CABLE SPACE FRAMES

Free access

G. M. Gasii | DOAJ | 2016

requirements. An important aspect in finding constructive solutions for new structures is the use of reliable and advanced materials. Considering this ...

TYPES OF STEEL AND CONCRETE COMPOSITE CABLE SPACE FRAMES.
ТИПЫ ПРОСТРАНСТВЕННЫХ СТРУКТУРНО-ВАНТОВЫХ СТАЛЕЖЕЛЕЗОБЕТОННЫХ КОНСТРУКЦИЙ.
ТИПИ ПРОСТОРОВИХ СТРУКТУРНО-ВАНТОВИХ СТАЛЕЗАЛІЗОБЕТОННИХ КОНСТРУКЦІЙ

Free access

Gasii, G. M. | Scientific Periodicals of Ukraine | 2016

requirements. An important aspect in finding constructive solutions for new structures is the use of reliable and advanced materials. Considering this ...

TRANSPORTATION OF COAL BY SEA AND RISKS ASSOCIATED WITH ITS TRANSPORTATION

Free access

Sergey Yu. Nikolashin / Timur R. Khabirov | DOAJ | 2022

published a wide range of documents relevant to this specific area of research. In recent decades, marine accidents have attracted a lot of ...

Toward the Potential Scale-Up of Sn_{0.9}Mn_{0.1}O_{2}‖LiNi_{0.6}Mn_{0.2}Co{0.2}O_{2} Li-Ion Batteries – Powering a Remote-Controlled Vehicle and Life Cycle Assessment

Free access

Birrozzi, Adele / Bautista, Sebastian Pinto / Asenbauer, Jakob et al. | BASE | 2022

Academic research in the battery field frequently remains limited to small coin or pouch cells, especially for new materials that are still ...

TOPOLOGICAL DESIGNING AND ANALYSIS OF THE COMPOSITE WING RIB

Free access

Zheng Hu / Olexii Vambol | DOAJ | 2020

the structure, as well as a decreasing in production costs. The advanced technologies in the engineering software allows to solute different ...

Tools for deep-sea navigation

Free access

Silva, Eduardo / Figueiredo, António / Almeida, José et al. | BASE | 2018

used in various types of underwater vehicles (AUV’s, Landers or ROV’s) or for the transport of materials or tools in the open sea or other ...

Keywords: Ocean bottom -- Research

Thoughts on development of modern ship technology

Free access

Yingfu ZHU / Zhiguo XIONG / Yi YUAN et al. | DOAJ | 2022

integration technology, network information technology, digital intelligence enabling technology, new energy security technology, advanced material ...

Publisher: Editorial Office of Chinese Journal of Ship Research

The Robustness and Sustainability of Port Logistics Systems for Emergency Supplies from Overseas

Free access

Yanyu Chen / Wenzhe Zheng / Wenbo Li et al. | DOAJ | 2020

the outbreak. Research data show that the shortest path can be planned between each material supply location. The research results show that ...

The Ground Control Station Design For Can-Sized Satellite (CanSAT) System

Free access

Abdul Razak, Noor Thuwaibah / Majid, Huda A / Saparuddin, Faiz Asraf et al. | BASE | 2020

Publisher: Institute for Research on Innovation and Industrial System (IRIS) , International Journal of Advanced Technology in Mechanical, Mechatronics and Material (IJATEC)

The Effects of Challenging Walking Conditions on Kinematic Synergy and Stability of Gait in People with Knee Osteoarthritis: A Study Protocol

Free access

Shafizadegan, Zohreh / Sarrafzadeh, Javad / Salehi, Reza et al. | BASE | 2022

multi‑segmental movements’ coordination during walking. To our knowledge, no research has evaluated the alterations in the gait kinematic ...

Technical State Assessment of Charge Exchange System of Self-Ignition Engine, Based On the Exhaust Gas Composition Testing

Free access

Rudnicki Jacek / Zadrąg Ryszard | DOAJ | 2017

interaction of many output variables. It may be also implemented as a tool for preparation of experimental material for other advanced diagnostic ...

System-Engineered Miniaturized Robots: From Structure to Intelligence

Free access

Bandari, Vineeth Kumar / Schmidt, Oliver G. | BASE | 2021

The development of small machines, once envisioned by Feynman decades ago, has stimulated significant research in materials science ...

Keywords: soft shareable materials

Switched control of a SCARA robot with shared actuation resources

Free access

van der Maas, A. / Steinbuch, Y.F. / Boverhof, A. et al. | BASE | 2017

of materials. In this paper, such a solution is proposed by sharing actuation resources between several actuators and using advanced motion ...

Publisher: Eindhoven University of Technology research portal

SUPERTANK Laboratory Data Collection Project. Volume I: Main Text

Free access

Kraus, Nicholas C. / McKee Smith, Jane | HENRY – Federal Waterways Engineering and Research Institute (BAW) | 1994

the O.H. Hinsdale Wave Research Laboratory, Oregon State University, over the period 29 July to 20 September 1991. The objectives of the ...

Publisher: U.S. Army Engineer Research and Development Center (ERDC) , Vicksburg, Mississippi

SUPERTANK Laboratory Data Collection Project. Volume II, Appendices A-I

Free access

McKee Smith, Jane / Kraus, Nicholas C. | HENRY – Federal Waterways Engineering and Research Institute (BAW) | 1995

the O. H. Hinsdale Wave Research Laboratory, Oregon State University, over the period 29 July to 20 September 1991. The objectives of the ...

Publisher: U.S. Army Engineer Research and Development Center (ERDC) , Vicksburg, Mississippi

Stress fields in granular material and implications for performance of robot locomotion over granular media

Free access

Ren, Diandong / M. Leslie, Lance / Fu, Congbin | BASE | 2015

experiments is re-examined using an advanced Navier-Stokes framework with a parameterized granular viscosity. It is found that the performance ...

Publisher: Khalsa Publications , Council for Innovative Research (E-Journals)

Skin inspired flexible and stretchable electrospun carbon nanofiber sensors for neuromorphic sensing

Free access

Sengupta, Debarun / Mastella, Michele / Chicca, E. et al. | BASE | 2022

During the past few decades, a significant amount of research effort has been dedicated toward developing skin-inspired sensors for real ...

Publisher: University of Groningen research database

SIMULATION AND OPTIMIZATION OF ULTRALIGHT HELICOPTER AERODYNAMIC CHARACTERISTICS

Free access

Viktor P. Zharov / Sergey P. Lisin | DOAJ | 2012

Keywords: Materials of engineering and construction. Mechanics of materials

Self-Powered Stretchable Sensor Arrays Exhibiting Magnetoelasticity for Real-Time Human–Machine Interaction

Free access

Zhang, Tongtong / Ding, Yi / Hu, Chaosheng et al. | BASE | 2023

Publisher: University of Bath's research portal

Keywords: name=Materials Science(all) , name=Mechanics of Materials

SELECTION AND OPTIMIZATION OF FUSELAGE COMPONENTS FOR MODERN AIRPLANES

Free access

Ihor Andriyovych Makarov / Sergey Romualdovich Ignatovich | DOAJ | 2019

advanced composite structures vs well known conventional materials. It was researched sizing and optimization of choosing of structural materials ...

Keywords: aircraft materials , sandwich materials

Schlussbericht zum Verbundvorhaben CISOVSKIT: Entwicklung von hocheffizienten Hybrid-Solarzellen aus CIGS- und Perowskit-Materialien; Teilvorhaben KIT: Fortgeschrittene spektroskopische Analyse von Materialien und Bauelementen : Laufzeit: 01.09.2015-28.02.2019

Free access

Hetterich, Michael / Karlsruher Institut für Technologie, Lichttechnisches Institut | TIBKAT | 2019

Schlussbericht des Teilprojektes "Brennstoffzellenintegration" der Daimler AG im Rahmen des BMWi-Förderprojektes "Verbundvorhaben miniBIP - metallische bipolare Platten aus beschichteten Hochleistungswerkstoffen" : Laufzeit des Vorhaben: 01.06.2012-30.06.2016

Free access

Kinlechner, Linda Ariane / Zurell, Klaus-Peter / Daimler AG | TIBKAT | 2016

Keywords: Hochleistungswerkstoff , Metallischer Werkstoff

RPBP: Rapid-prototyped remote-brain biped with 3D perception

Free access

Vona, M / Kanoulas, D | BASE | 2019

developed to provide a low-cost and reliable platform for locomotion and perception research. The robot is made of customized 3D-printed material ...

Rotatable supporting sliding block assembly for suspension vehicle

Free access

KONG QINGRUI / SHI LIMING | European Patent Office | 2022

block are assembled in the groove; the rubber-coated bearing serves as a roller of a vehicle in the mode that polyurethane and other materials ...

Robotized assembly and inspection of composite fuselage panels: the LABOR project approach

Free access

Caterino Mario / Chiacchio Pasquale / Cristalli Cristina et al. | BASE | 2021

IOP Conference Series: Materials Science and Engineering PAPER • THE FOLLOWING ARTICLE ISOPEN ACCESS Robotized assembly and inspection of ...

Robotic partial nephrectomy for renal cancer

Free access

Danilo Coco / Silvana Leanza | BASE | 2020

partial nephrectomy and how it has solved some of the current issues in the treatment of renal cancer. Materials and methods: The article ...

Robot-aided tunnel inspection and maintenance system by vision and proximity sensor integration

Free access

González Víctores, Juan Carlos / Martínez de la Casa Díaz, Santiago / Jardón Huete, Alberto et al. | BASE | 2011

This article describes an unprecedented alternative to manual procedures for the application of advanced composite materials, such as Fiber ...

Robot-Aided Fabrication of Materially Efficient Complex Concrete Assemblies

Free access

Elif, E / Aydin, A / Bingol, CK et al. | BASE | 2020

waste material. The research agenda explores methods of associating architectural, spatial, and structural criteria with a material-informed ...

REVIEW OF APPLICATION AND RESEARCH BASED ON COLD SPRAY COATING MATERIALS

Free access

Kun Tan / Sergii Markovych / Wenjie Hu et al. | DOAJ | 2021

spray technology in the field of spray materials and summarizes the existing conventional metal series, rare metal series and non-metal material ...

Keywords: metal materials , polymer materials , ceramic powder materials

Research progress on SiCN ceramic prepared at low temperature by chemical vapor deposition

Free access

MU Yangyang / TU Jianyong / XUE Jimei et al. | DOAJ | 2019

Chemical vapor deposition (CVD) is a new technology for preparing inorganic materials which possess some advantages, such as lower ...

Publisher: Journal of Aeronautical Materials

Research progress on meso-structure and mechanical properties of SiCf/SiC textile composites

Free access

YANG Tiantian / ZHANG Diantang / QIU Haipeng et al. | DOAJ | 2020

researches on the preparation technology, performance and meso-structure of SiCf/SiC textile composites. In the long run, it is still the research ...

Publisher: Journal of Aeronautical Materials

Keywords: research progress

Research progress on dimensional accuracy control technologies of complex thin-walled superalloy investment castings for aero-engines

Free access

CUI Jiayu / WANG Donghong / XIAO Chengbo et al. | DOAJ | 2024

technologies. There is an urgent need to build a digital twin platform for investment casting in the future and to develop more advanced accurate ...

Publisher: Journal of Aeronautical Materials

Research Progress of Laser Shock Treatment in the Field of Material Forming

Free access

YANG Fenghuai / LU Guoxin / YANG Qingtian et al. | DOAJ | 2018

Laser shock treatment is a kind of advanced surface strengthening technology for metallic materials, and its remarkable strengthening ...

Publisher: Journal of Aeronautical Materials

Keywords: material forming

Research Progress of High Temperature Microwave Absorption Materials

Free access

LIANG Caiyun / WANG Zhijiang | DOAJ | 2018

High temperature microwave absorption material is significantly important to improve the viability of advanced weapon and equipment. This ...

Publisher: Journal of Aeronautical Materials

Keywords: SiC materials , MAX phase materials , carbon materials

Research progress of atomisation and forming technology of high performance metallic materials

Free access

ZHANG Guoqing / LIU Na / LI Zhou | DOAJ | 2020

The research and development in liquid metal atomisation and forming technologies of high performance metallic materials with the emphases ...

Publisher: Journal of Aeronautical Materials

Research progress of aero-engine blade materials and anti-fatigue grinding technology

Free access

HUANG Yun / LI Shaochuan / XIAO Guijian et al. | DOAJ | 2021

With the development of advanced aviation engines in the direction of high thrust-to-weight ratio and lightweight, a series of lightweight ...

Publisher: Journal of Aeronautical Materials

Keywords: aviation metal materials , composite materials

Research progress of additive manufacturing process and equipment for thermoplastic composites

Free access

XIE Wei | DOAJ | 2023

different processing routes and material systems, the equipment for fabricating advanced thermoplastic composites becomes larger and more integrated ...

Publisher: Journal of Aeronautical Materials

Research progress in airworthiness conformity verification method and technology of civil aircraft materials

Free access

JIN Haipeng / YE Lei / LIU Shiying et al. | DOAJ | 2022

analysis is the core of material conformity verification. MOC1, MOC2, MOC4 methods are mainly used to verify airworthiness conformity of materials ...

Publisher: Journal of Aeronautical Materials

Keywords: materials

Research progress and development trend of aluminum-lithium alloys

Free access

FENG Zhaohui / YU Juan / HAO Min et al. | DOAJ | 2020

reduction ability. It is considered as the ideal structural materials for the aircraft and warship in the 21st century. This paper briefly reviews ...

Publisher: Journal of Aeronautical Materials

Keywords: advanced application technology

Research Process in Plasma Spray Physical Vapor Deposited Thermal Barrier Coatings

Free access

SHI Jia / WEI Liangliang / ZHANG Baopeng et al. | DOAJ | 2018

-PVD is recognized as the processing technology for advanced TBCs in the future. In this paper, physical principles and recent research ...

Publisher: Journal of Aeronautical Materials