search-head

You are here: Homepage >  Search

SAE Technical Papers   English   Clear all
251–300 of 8,260 hits
|
Sort by:

    High Temperature Multilayer Ceramic Capacitors

    Alberta, E. F. / Kwon, S. / Hackenberger, W. S. | SAE Technical Papers | 2009

    Comparison of NOx emissions from hydrous ethanol and n-butanol predicted by an Otto cycle two-zone model using the Zeldovich reactions mechanism

    Fagundez, Jean L. S. / Martins, Mario E. S. / Salau, Nina P. G. | SAE Technical Papers | 2018

    Combustion Performance of n-butanol, Hydrous Ethanol and Their Blends as Potential Surrogates for the Brazilian Gasoline

    Golke, Diego / Fagundez, Jean L. S. / Martins, Mario E. S. et al. | SAE Technical Papers | 2016

    Estimating the Influence of Pulsating Flow Conditions on the Performance of a Turbine

    Shamsi, S. S. | SAE Technical Papers | 1979

    Design and Development of Light Weight Flexible Power Transmission Shaft for High Speed Fighter Aircraft Application

    Ganesan, S / Jothi, S / Balamurugan, V | SAE Technical Papers | 2005

    Controlling Nitric Oxide in C I Engine - Bio-Mix Approach

    Mehta, Pramod S. / Jeyaseelan, Thangaraja | SAE Technical Papers | 2014

    Experimental Emission Characteristics Study of Ethanol-Gasoline Fuel Blends on a GDI Engine with a Three-Way Catalyst

    S, Easwar Ram / Ramakrishnan, Muthu / R, Navaneetha Kannan et al. | SAE Technical Papers | 2024

    Microbiological Growth Study of Biodiesel Fuel

    Zannikos, Fanourios / Dodos, George S. | SAE Technical Papers | 2013

    A Novel Solid Oxide Fuel Cell Based Catalytic Converter Replacement for Enhanced Emission Control and Power Generation in Automotive Exhaust

    Ahn, Jeongmin / Welles, Thomas S. | SAE Technical Papers | 2020

    Brush-Less Car Alternator with DC Stator Excitation

    Okrainskaya, I. S. / Narasimhamurthi, N. / Gladychev, P. S. et al. | SAE Technical Papers | 2003

    Experimental Investigation on the Wear and Tear Characteristics of Chrome and Moly Coated Piston Rings Used in Automobile Engine Application

    S, Arulkumar / S, Balakrishnan / N, Boopalan et al. | SAE Technical Papers | 2022

    Diesel Exhaust Nanoparticles Characterization by Multiwavelength Techniques, Laser Induced Incandescence and ELPI

    Vaglieco, B. M. / Tornatore, C. / Di Iorio, S. et al. | SAE Technical Papers | 2005

    The Application of the Milner CVT as a Novel Power Splitting Transmission for Hybrid Vehicles

    Parker, D. A. / Moyers, J. / Akehurst, S. et al. | SAE Technical Papers | 2011

    Integrated Testing at Lab from Road by Doing Conversion and Correlation between Subjective to Objective Assessment on Ride Comfort Parameter of Gear Shifting Quality in Two- Wheeler

    Manoranjan, R. / K S, Sreekanth | SAE Technical Papers | 2024

    Contact Pressure Distribution for Flow of Metal through Drawbeads

    Sriram, S. | SAE Technical Papers | 2006

    Automotive Buzz, Squeak and Rattle (BSR) Detection and Prevention

    Gosavi, Santosh S | SAE Technical Papers | 2005

    Advanced Mounting System for Light Duty Diesel Filter

    Sawyer, C. B. / Olson, J. R. / Fernandes, S. D. et al. | SAE Technical Papers | 2007

    Lubricant Technology for Dual Clutch Transmissions

    Tipton, C. D. / Hurley, S. / Cook, S. P. | SAE Technical Papers | 2006

    Computational Prediction and Measurement of Break-out Noise of Mufflers

    Munjal, M. L. / Narayana, T. S. S. | SAE Technical Papers | 2007

    Modeling Noise Control Materials

    Sureshkumar, S. / Raveendra, S. T. | SAE Technical Papers | 2003

    Cape York International Spaceport

    Schaetzel, S. S. | SAE Technical Papers | 1987

    Stress Investigations In Gas Turbine Discs and Blades

    MANSON, S. S. | SAE Technical Papers | 1949

    Predicting and Optimizing CNG Vehicle Performance on Chassis Dynamometer through 1D Simulation by using Vehicle Performance Algorithm

    Kavathekar, Kishor Kumar / Jamadar, Mohammad / Marathe, N. V et al. | SAE Technical Papers | 2015

    Experiments and Multi-Dimensional Simulation of Dual-Fuel Diesel/Natural Gas Engines

    Gambino, M. / Scarcelli, R. / Cordiner, S. et al. | SAE Technical Papers | 2007

    Soot Concentration and Particle Size in a DI CR Diesel Engine by Broadband Scattering and Extinction Measurements

    Vaglieco, B. M. / Mancaruso, E. / Merola, S. S. | SAE Technical Papers | 2005

    Fuel Effects on Particulate Matter Emissions Variability from a Gasoline Direct Injection Engine

    Wallace, James S. / Ramos, Manuel J.M.G. | SAE Technical Papers | 2018

    N-Hance: Software for Identification of Critical BSR Locations in Automotive Assemblies using Finite Element Models

    Naganarayana, B. P. / Brines, Robert S. / Shankar, S. et al. | SAE Technical Papers | 2003

    Optical Investigations of the Abnormal Combustion in a Boosted Spark-ignition PFI Engine

    Vaglieco, B. M. / Tornatore, C. / Sementa, P. et al. | SAE Technical Papers | 2009

    Design and Development of a Virtual Autonomous System

    Narain, C.M. / Patil, Sharanbassapa S. | SAE Technical Papers | 2022

    Low Cost Electronically Controlled Fuel Metering System for Small Gas Turbine Engines

    Hong, H. / Mohtasebi, S. S. | SAE Technical Papers | 1999

    Relationship between Lubricating Basestock Composition and the Effects of Additives on Oxidation Stability

    Ku, C. S. / Lin, R. S. / Hsu, S. M. | SAE Technical Papers | 1982

    Design Considerations For an On-Board Computer System

    Laurance, N. L. / Oswald, R. S. / Devlin, S. S. | SAE Technical Papers | 1975

    An Analysis of Assisted Turbocharging with Light Hybrid Powertrain

    Shahed, S. M. | SAE Technical Papers | 2006

    Rear-Seat Occupant Responses in NHTSA Rear Crash Tests

    Parenteau, Chantal S. / Viano, David C. | SAE Technical Papers | 2018

    A Crevice Blow-by Model for a Rapid Compression Expansion Machine Used for Chemical Kinetic (HCCI) Studies

    Goldsborough, S. Scott | SAE Technical Papers | 2007

    Development of a 2-Stroke CNG Engine for 3-Wheeler Vehicle for the Indian Market

    Anbukarasu, A. S. / Kavathekar, K. P. / Marathe, N. V. et al. | SAE Technical Papers | 2009

    Investigation on Performance, Combustion and Emission Characteristics of a Turbocharged Low Heat Rejection DI Diesel Engine with Extended Expansion Concept

    Bernard S, Stephen | SAE Technical Papers | 2009

    A Techno-Economic Analysis of BEV Service Providers Offering Battery Swapping Services

    Pesaran, Ahmad / Neubauer, Jeremy S. | SAE Technical Papers | 2013

    Seeing is Believing - A Better Way to Diagnose Noise Sources

    Gaddis, D. / Moondra, M. S. / Beniwal, R. et al. | SAE Technical Papers | 2005

    Self-Piercing Riveted Joints and Resistance Spot Welded Joints in Steel and Aluminium

    Olivier, C. A. / Liebrecht, F. / Booth, G. S. et al. | SAE Technical Papers | 2000

    Impacts of Real-World Driving and Driver Aggressiveness on Fuel Consumption of 48V Mild Hybrid Vehicle

    Ivanco, Andrej / Liu, Zifan / Filipi, Zoran S. | SAE Technical Papers | 2016

    The Seven Parameters of Highly Effective Cable Control Systems

    Maeda, Takashi S. | SAE Technical Papers | 2008

    Establishing the Method of Evaluation and Layout Optimization of Crank Case Blow-by Circuit for 3 Cylinder Diesel Engine

    Premnath, D. / Balasubramanian, N. / Krishnan, S. et al. | SAE Technical Papers | 2011

    Next Generation NASA GA Advanced Concept

    Hahn, Andrew S. | SAE Technical Papers | 2006

    Development of Pd-only Three Way Catalyst Technology

    Gandhi, Haren S. / Hepburn, Jeffrey S. / Patel, Ken S. et al. | SAE Technical Papers | 1994

    Development And Validation of a Boundary Layer Control System to Increase Intake Port Steady Permeability

    Fontanesi, S. | SAE Technical Papers | 2004

    Diagnostics of Engine Noise During Run-up Using HELS Based Nearfield Acoustical Holography

    Abualfeilat, A. / Gaddis, D. / Tabbert, D. et al. | SAE Technical Papers | 2005

    Analysis of the Increased Formability of Aluminum Alloy Sheet Formed Using Electromagnetic Forming

    Imbert, J. / Worswick*, M. / Golovashchenko, S. et al. | SAE Technical Papers | 2005

    The Shot Peening of Metals — Mechanics and Structures

    Al-Hassani, S. T. S. | SAE Technical Papers | 1982

    Effect of CCV and OCV System in Heavy Duty CNG Engine on the Particulate Emissions

    Kshirsagar, Chinmay / bandyopadhyay, Debjyoti / Kavathekar, Kishorkumar et al. | SAE Technical Papers | 2021

Number of results
10 20

Filter search results