search-head

You are here: Homepage >  Search

Licensed (where required)   English   Clear all

Synonyms were used for: Stanzen
Search without synonyms: keywords:(Stanzen)

1–50 of 93 hits
|
Sort by:

    Force Mechanism and Parametric Finite Element Analysis of Punching Shear Behavior of Flat Slabs with Welded Shear Reinforcements

    Jiang, Mingyue / Shi, Qingxuan | Springer Verlag | 2024
    Keywords: Punching shear

    Failure Mode of Orthotropic Two-way Composite Slab under Concentrated Load

    Zhan, Yulin / Huang, Wenfeng / Qiao, Yu et al. | Springer Verlag | 2022
    Keywords: Bending punching failure mode

    Experimental Evaluation of the Load Carrying Capacity of SFRC Flat Slabs Varying the Rectangularity Index of Columns

    Alves, Vinicius / Oliveira, Leonardo / Santos, Antonio et al. | Springer Verlag | 2021
    Keywords: Punching

    Effect of Embedded Pipelines within Slab Thickness on Punching Shear Capacity of Flat Slabs

    Al-Tameemi, Haider Ali / Habelalmateen, Mohsen A. / Alalikhan, Ahmed A. | Springer Verlag | 2021
    Keywords: Punching shear

    Nonlinear Finite Element Analysis of Punching Shear Strength of Eccentrically Loaded RC Flat Slabs with Opening

    Živković, Smilja / Bešević, Miroslav / Purčar, Martina Vojnić et al. | Springer Verlag | 2019
    Keywords: punching shear

      Nonlinear Finite Element Analysis of Punching Shear Strength of Eccentrically Loaded RC Flat Slabs with Opening

      Živković, Smilja / Bešević, Miroslav / Purčar, Martina Vojnić et al. | Online Contents | 2019
      Keywords: punching shear

    Analytical Study of Flat Slab Collapse Mechanisms due to Overloading in a Cluster of Exterior Panels

    Pachenari, Alireza / Bagherzadeh, Shahab | Springer Verlag | 2018
    Keywords: punching shear

      Analytical Study of Flat Slab Collapse Mechanisms due to Overloading in a Cluster of Exterior Panels

      Pachenari, Alireza / Bagherzadeh, Shahab | Online Contents | 2019
      Keywords: punching shear

    Punching Shear Strengths of RC Slab-Column Connections: Prediction and Reliability

    Chetchotisak, Panatchai / Ruengpim, Pongpan / Chetchotsak, Danaipong et al. | Springer Verlag | 2017
    Keywords: punching shear

      Punching Shear Strengths of RC Slab-Column Connections: Prediction and Reliability

      Chetchotisak, Panatchai / Ruengpim, Pongpan / Chetchotsak, Danaipong et al. | Online Contents | 2018
      Keywords: punching shear

    Calculation of RC Flat Slabs and Flat Foundations Punching Using Mini-Max Principle

    Iskhakov, I. / Ribakov, Y. | Springer Verlag | 2017
    Keywords: punching shear

      Calculation of RC Flat Slabs and Flat Foundations Punching Using Mini-Max Principle

      Iskhakov, I. / Ribakov, Y. | Online Contents | 2018
      Keywords: punching shear

    Numerical Punching Shear Analysis of Unbonded Post-Tensioned Slabs with Inverted-U Shaped

    Khatib, Milad / Abou Saleh, Zaher / Baalbaki, Oussama et al. | Springer Verlag | 2018
    Keywords: punching shear

      Numerical Punching Shear Analysis of Unbonded Post-Tensioned Slabs with Inverted-U Shaped

      Khatib, Milad / Abou Saleh, Zaher / Baalbaki, Oussama et al. | Online Contents | 2018
      Keywords: punching shear

    Predictability evaluation of the existing punching shear formulas using failure test and probability-based approach

    Ju, Minkwan / Park, Cheolwoo / Hwang, Eui Seung et al. | Springer Verlag | 2015
    Keywords: punching shear formula

      Predictability evaluation of the existing punching shear formulas using failure test and probability-based approach

      Ju, Minkwan / Park, Cheolwoo / Hwang, Eui Seung et al. | Online Contents | 2015
      Keywords: punching shear formula

    A New Generation of Adiabatic Blanking Machines for Car Body Components

    Lazzarotto, L. | Tema Archive | 2014
    Keywords: Stanzen

    Prediction of punching shear strength of HSC interior slab-column connections

    Elsanadedy, Hussein M. / Al-Salloum, Yousef A. / Alsayed, Saleh H. | Springer Verlag | 2013
    Keywords: punching shear strength

      Prediction of punching shear strength of HSC interior slab-column connections

      Elsanadedy, Hussein M. / Al-Salloum, Yousef A. / Alsayed, Saleh H. | Online Contents | 2013
      Keywords: punching shear strength

    Principal component analysis-based image fusion routine with application to automotive stamping split detection

    Zhou, Yi / Mayyas, Ahmad / Omar, Mohammed A. | Tema Archive | 2011
    Keywords: Stanzen

    1.4310 (C1000) stainless steel characterizations

    Toscan, Francois / Bellut, Xavier / Lafounadri, Moulay et al. | Tema Archive | 2011
    Keywords: Stanzen

    Representation and similarity assessment in case-based process planning and die design for manufacturing automotive panels

    You, Chun-Fong / Tsai, Yi-Lung / Liu, Kun-Yu | Tema Archive | 2010
    Keywords: Stanzen

    Downstream activities in example from the perspective of ThyssenKrupps automotive customers

    Hoffmann, Oliver | Tema Archive | 2010
    Keywords: Stanzen

    Experimental and numerical assessment of Tailor-Welded Blanks formability

    Gaied, Sadok / Roelandt, Jean-Marc / Pinard, Fabrice et al. | Tema Archive | 2009
    Keywords: Stanzen

    Development of total stamping simulation system for evaluating formability of sheet metal forming parts

    Moriya, Takeshi / Takamura, Masato / Takahashi, Susumu et al. | Tema Archive | 2009
    Keywords: Stanzen

    Development of automotive lightweighting technology in Baosteel

    Wang, Li / Lu, Jiangxin | Tema Archive | 2009
    Keywords: Stanzen

    Material parameters in a simulation of metal sheet stamping

    Gauchia, A. / Alvarez-Caldas, C. / Quesada, A. et al. | Tema Archive | 2009
    Keywords: Stanzen

    Simulation of magnesium alloy AZ31 sheet during cylindrical cup drawing with rate independent crystal plasticity finite element method

    Tang, Weiqin / Zhang, Shaorui / Peng, Yinghong et al. | Tema Archive | 2009
    Keywords: Stanzen

    The analysis of production technology and material properties of chassis part from high strength steel

    Bilik, Jozef / Tittel, Viktor / Babicova, Ludmila | Tema Archive | 2009
    Keywords: Stanzen

    Analysis of manufacturing effects on fatigue failure of an automotive component using finite element methods

    Kang, W.J. / Kim, G.H. | Tema Archive | 2009
    Keywords: Stanzen

    The potential of a clinch-lock polymer metal hybrid technology for use in load-bearing automotive components

    Grujicic, M. / Sellappan, V. / Arakere, G. et al. | Tema Archive | 2009
    Keywords: Stanzen

    Adiabatic blanking of metal sheets: Technological positioning and industrial developments for production

    Lazzarotto, L. / Michon, R. | Tema Archive | 2008
    Keywords: Stanzen

    Sheet metal forming analyses with an emphasis on the springback deformation

    Firat, Mehmet / Kaftanoglu, Bilgin / Eser, Orhan | Tema Archive | 2008
    Keywords: Stanzen

    Computational analysis of injection-molding residual-stress development in direct-adhesion polymer-to-metal hybrid body-in-white components

    Grujicic, M. / Sellappan, V. / Pandurangan, B. et al. | Tema Archive | 2008
    Keywords: Stanzen

    Current trends of hydroforming process into automotive body structure and chassis applications

    Koganti, Ramakrishna / Balzer, Jason / Hertell, Klaus | Tema Archive | 2008
    Keywords: Stanzen

    Innovative press hardened steel (Usibor 1500P and Ductibor 500P) based laser welded blanks solutions for improved weight savings and crash safety management

    Pic, Aurelien / Munera, Daniel Duque / Schmit, Francis et al. | Tema Archive | 2008
    Keywords: Stanzen

    Press-hardened steels in automotive applications - changes and challenges

    Lachmann, Carsten / Eisenberg, Stephan / Paar, Uwe | Tema Archive | 2008
    Keywords: Stanzen

    An approach to model sheet failure after onset of localized necking in industrial high strength steel stamping and crash simulations

    Kessler, Lutz | Tema Archive | 2008
    Keywords: Stanzen

    Progress in implementation of advanced high-strength steels into vehicle structures

    Fekete, James R. / Hall, Jody N. / Meuleman, David J. et al. | Tema Archive | 2008
    Keywords: Stanzen

    An efficient approach to springback compensation for Ultra High Strength Steel structural components for the automotive field

    Placidi, Filippo / Vadori, Roberto / Cimolin, Flavio et al. | Tema Archive | 2008
    Keywords: Stanzen

    Simulation-based prediction model of the draw-bead restraining force and its application to sheet metal forming process

    Bae, G.H. / Song, J.H. / Huh, H. et al. | Tema Archive | 2007
    Keywords: Stanzen

    A simulation-based design parameter study in the stamping process of an automotive member

    Song, Jung-Han / Huh, Hoon / Kim, Se-Ho | Tema Archive | 2007
    Keywords: Stanzen

    A numerical and experimental study of surface deflections in automobile exterior panels

    Park, C.D. / Chung, W.J. / Kim, B.M. | Tema Archive | 2007
    Keywords: Stanzen

    Overview of forming and formability issues for high volume aluminum car body panels

    Daniel, Dominique / Guiglionda, Gilles / Litalien, Pierre et al. | Tema Archive | 2006
    Keywords: Stanzen

    Cost-oriented stamping material and tolerance optimization

    Pletz, D. / Houten, F.J.A.M. van | Tema Archive | 2006
    Keywords: Stanzen

    A study on the manufacturing process of the muffler tube for heavy equipments

    Han, Kyu-Taek / Kwon, Gi-Tae | Tema Archive | 2006
    Keywords: Stanzen

    Electromagnetic forming and joining for automotive applications

    Golovashchenko, S. | Tema Archive | 2006
    Keywords: Stanzen

    Some highlights on new steel products for automotive use

    Babbit, Michel | Tema Archive | 2006
    Keywords: Stanzen

    Influence of discontinuous yielding on normal anisotropy (R-value) measurements

    Hance, Brandon M. | Tema Archive | 2005
    Keywords: Stanzen

    Die Design goes full bore into another dimension

    Proeber, Raymond J. | Tema Archive | 2005
    Keywords: Stanzen

    Springback control in stamping car body parts

    Maddis, M. De / Basuc, D. / Lombardi, F. | Tema Archive | 2004
    Keywords: Stanzen

    Manufacturing a roof frame from ultrahigh-strength steel materials by hot stamping

    Schießl, Gerhard / Possehn, Thomas / Heller, Thomas et al. | Tema Archive | 2004
    Keywords: Stanzen

    Technologies and equipment of friction stir welding for automotive application

    Hirano, Satoshi / Okamoto, Kazutaka / Aota, Kinya et al. | Tema Archive | 2004
    Keywords: Stanzen

    Crashworthiness assessment of front side members in an auto-body considering the fabrication histories

    Huh, H. / Kim, K.P. / Kim, S.H. et al. | Tema Archive | 2003
    Keywords: Stanzen

    Automotive door design using structural optimization and design of experiments

    Lee, Kwon-Hee / Shin, Jung-Kyu / Song, Se-Il et al. | Tema Archive | 2003
    Keywords: Stanzen

    Springback compensation for ultra high strength stamping

    Geng, L. / Sa, C.Y. / Oetjens, T. et al. | Tema Archive | 2003
    Keywords: Stanzen

    Mechanical presses on the move

    Kuvin, B.F. | Tema Archive | 2003
    Keywords: Stanzen

Number of results
10 20

Filter search results