search-head

You are here: Homepage >  Search

Physics   Clear all
1–20 of 70 hits
|
Sort by:

    Role of adhesives in the dimensional stability of polycarbonate structural panels

    Anand, E.S. / Marur, S.R. / Wittbrodt, J. et al. | Tema Archive | 2007
    This paper evaluates the function of adhesives much beyond their traditionally well-understood role of adhesion in emerging thermo-plastic ...

    Twin disc assessment of wheel/rail adhesion

    Gallardo-Hernandez, E.A. / Lewis, R. | Tema Archive | 2008
    Loss of adhesion between a railway wheel and the track has implications for both braking and traction. Poor adhesion in braking is a safety ...

    Sub-scale simulation and measurement of railroad wheel/rail adhesion under dry and wet conditions

    Wang, W.J. / Wang, H. / Wang, H.Y. et al. | Tema Archive | 2013
    the adhesion coefficient of wheel/rail. With an increase of speed and due to the water volume in the wheel/rail surface, the adhesion ...

    Experimental study on adhesion behavior of wheel/rail under dry and water conditions

    Wang, W.J. / Shen, P. / Song, J.H. et al. | Tema Archive | 2011
    The aim of this paper is to investigate the adhesion behavior of wheel/rail under dry and water conditions using a JD-1 wheel/rail ...

    A 3D dynamic model to investigate wheel-rail contact under high and low adhesion

    Vo, K.D. / Tieu, A.K. / Zhu, H.T. et al. | Tema Archive | 2014
    of wheel/rail under three contact situations, which included high and low adhesion, and full slip. Canted and non-canted rails were ...

    Latent reactive polyurethane adhesives for automotive applications

    Stammen, Elisabeth / Böhm, Stefan / Büchner, Jörg et al. | Tema Archive | 2008
    application and the laminating process can be separated. The adhesion properties of latent-reactive adhesives are equal to the properties of 2-part ...

    Study on the adhesion behavior of wheel/rail under oil, water and sanding conditions

    Wang, W.J. / Zhang, H.F. / Wang, H.Y. et al. | Tema Archive | 2011
    The objective of this study is to investigate the adhesion behavior of wheel/rail under oil, water and sanding conditions using a JD-1 ...

    The influence of high temperature due to high adhesion condition on rail damage

    Vo, K.D. / Tieu, A.K. / Zhu, H.T. et al. | Tema Archive | 2015
    initiation of the rails. The aims of this paper are to determine the temperature rise due to high adhesion contact and the thermal influence on the ...

    The role of silicone adhesives and sealing materials in the assembly of automotive exterior lighting components

    Joseph, Edward A. | Tema Archive | 2008
    This paper highlights the role silicone adhesives and sealing materials play in the assembly of automotive exterior lighting components ...

    Experimental investigation of influential factors on adhesion between wheel and rail under wet conditions

    Chen, H. / Ban, T. / Ishida, M. et al. | Tema Archive | 2008
    , which mainly focused on the effects of surface roughness and water temperature on the adhesion between wheel and rail under wet conditions. The ...

    Influence of surface characteristics on insect residue adhesion to aircraft leading edge surfaces

    Kok, Mariana / Mertens, Tobias / Raps, Dominik et al. | Tema Archive | 2013
    significant increase in drag and therefore causing an increase in fuel consumption. Consequently, current research is focused on the evaluation of ...

    Development of a HIL railway roller rig model for the traction and braking testing activities under degraded adhesion conditions

    Allotta, B. / Conti, R. / Meli, E. et al. | Tema Archive | 2013
    when degraded adhesion conditions occur. Traditionally, braking and traction performances should be verified on a full-scale roller rig to ...

    Investigation of the isolation and frictional properties of hydrophobic products on the rail head, when used to combat low adhesion

    Lewis, S.R. / Lewis, R. / Richards, P. et al. | Tema Archive | 2014
    adhesion incidents and the occurrence of the dew point. It is hypothesised that at or below the dew point water vapour from the air condenses onto ...

    Using standard adhesion tests to characterize performance of material system options for insulated rail joints

    Nicoli, E. / Dillard, D.A. / Dillard, J.G. et al. | Tema Archive | 2011
    . This article reports findings from a project conducted to study different bond systems consisting of various combinations of adhesives, fibrous ...

    An adhesion model for wheel–rail contact at the micro level using measured 3d surfaces

    Zhu, Y. / Olofsson, U. | Tema Archive | 2014
    Railway vehicles require a certain level of wheel–rail adhesion for efficient, reliable, and economical operation. A comprehensive wheel ...

    Adhesion of oil-covered substrates: Behaviour in the interphase during cure

    Greiveldinger, M. / Jacquet, D. / Verchere, D. et al. | Tema Archive | 1999
    The car industry uses adhesive bonding for bodywork assembly and, in many cases, application of adhesives is effected without prior ...

    Wheel/rail adhesion and analysis by using full scale roller rig

    Zhang, Weihua / Chen, Jianzheng / Wu, Xuejie et al. | Tema Archive | 2002
    results showed that the adhesion coefficient of wheel/rail decreased with increasing in the axle-load and running speed under the water ...

    Mode I fracture toughness of adhesively bonded joints as a function of temperature: Experimental and numerical study

    Banea, M.D. / Da Silva, L.F.M. / Campilho, R.D.S.G. | Tema Archive | 2011
    -temperature capabilities in order to maintain their mechanical properties and their structural integrity at the intended service temperature. One of ...

    Experimental investigation on the bending behaviour of hybrid and steel thin walled box beams—The role of adhesive joints

    Belingardi, G. / Scattina, A. | Tema Archive | 2013
    there are the safety matters. Within this contest, the weight reduction has become a key driver in the design of vehicles and it is necessary to ...

    The influence of additives on the adhesion behaviour of thermoplastic materials used in the automotive industry

    Jacobasch, H.J. / Grundke, K. / Schneider, S. et al. | Tema Archive | 1995
    The influence of release agents, impurities and light stabilizers on the mechanisms of pretreatment operations, such as flame or plasma ...

Number of results
10 50

Filter search results