21–40 of 633 hits
|

    Airbag for the closing of pipelines on explosions and leakages

    Eisenreich, N. / Neutz, J. / Seiler, F. et al. | Tema Archive | 2007
    , capable of withstanding up to 10 bar pressure. The choice of material was critical to ensure sufficient strength and chemical resistance while ...

    Airbags & airbag textiles

    Gotipamul, Rajanna L. / Pohane, Atul | Tema Archive | 2013
    sensor is the device that tells the bag to inflate; and the airbag's inflation system uses the rapid pulse of hot nitrogen gas from the chemical ...

    Air-cooled engine development

    Lawrence, Charles L. | Engineering Index Backfile | 1922
    Describes British experiments to improve performance of air-cooled engines for aircraft, which lead eventually to development of aluminum ...
    Publisher: Society of Chemical Industry

    Aircraft crash fire fighting by helicopter

    Riehl, C.A. | Engineering Index Backfile | 1958
    Tests of helicopter utilizing fire fighting equipment and personnel, conducted with dry chemical and mechanical foam fire extinguishing ...

    Aircraft-engine installation

    Nutt, A. | Engineering Index Backfile | 1930
    Discussion of proper method of engine mounting and critical review of fuel-system installation; electric wiring, engine controls and ...
    Publisher: Society of Chemical Industry

    Aircraft-engine specifications

    Engineering Index Backfile | 1930
    Publisher: Society of Chemical Industry

    Airplane design and performance improvements since the armistice

    Monteith, C.N. | Engineering Index Backfile | 1922
    Outline of various features of airplane-development investigation that have been prosecuted. Discusses four specific requirements for ...
    Publisher: Society of Chemical Industry

    All-Fiber Acoustooptic Phase Modulators Using Chemical Vapor Deposition Zinc Oxide Films

    Koch, M. H. / Janos, M. / Lamb, R. N. et al. | British Library Online Contents | 1998
    Publisher: IEEE INSTITUTE OF ELECTRICAL AND ELECTRONICS

    Alternative fuels in aviation

    Braun-Unkhoff, Marina / Riedel, Uwe | Online Contents | 2014
    detailed chemical reaction mechanism following the concept of a surrogate. Such validated reaction models able to describe and to predict reliably ...

    Aluminothermic preparation of Hf-Ta and Nb-10Hf-1Ti alloys and their characterization

    Sharma, I.G. / Majumdar, S. / Chakraborty, S.P. et al. | Tema Archive | 2003
    -reduction of the oxides of individual components. In the adopted process the heat generated from the chemical reactions, serves the function of ...

    Ambient cure high solids acrylic resins for automotive refinish clear coat applications

    Petit, H. / Henry, N. / Krebs, A. et al. | Tema Archive | 2001
    fast at ambient temperature in order to reduce the investment in drying equipment and the time of repair. However, matching the stringent ...

    Amine type inhibitor effect on corrosion-erosion wear in oil gas pipes

    Martinez, D. / Gonzalez, R. / Montemayor, K. et al. | Tema Archive | 2009
    . Combined parameters like fluid flow regime and chemical composition of the wall deposited products increase oil gas pipes wearing. Corrosion ...

    A modern analytical toolbox: defect (W&D) studies of automotive coating systems, including depth profiling studies

    Adamsons, Karlis | Tema Archive | 2012
    Chemical and microscopy measurement technologies have proven to be very powerful in our failure analysis efforts to detail composition and ...

    Analysis of Plume Infrared Signatures of S-Shaped Nozzle Configurations of Aerial Vehicle

    An, C. H | Online Contents | 2016
    , the thermal flowfield and the distribution of chemical species within a plume, which are essential for the analysis of infrared signatures ...

    Analysis of the mass transfer controlled regime in automotive catalytic converters

    Santos, H. / Costa, M. | Tema Archive | 2008
    This article concentrates on the analysis of the mass transfer controlled regime in automotive catalytic converters operating under real ...

    Analysis of wear debris in rolling contact fatigue cracks of pearlitic railway wheels

    Cvetkovski, K. / Ahlström, J. / Norell, M. et al. | Tema Archive | 2014
    concentration of oxygen was measured in between flakes, indicating the presence of oxides and flakes being of similar chemical composition as the base ...

    Analytical Study for the Effects of Chemical Reaction and Mass Transfer on Free Convective Flow Past a Vertical Isothermal Cone Surface

    Odda, S. N | Online Contents | 2016
    AbstractAn analytical study is presented for the effects of chemical reaction and mass transfer on the free convective flow of a viscous ...

      Analytical Study for the Effects of Chemical Reaction and Mass Transfer on Free Convective Flow Past a Vertical Isothermal Cone Surface

      Odda, S. N | Online Contents | 2015
      AbstractAn analytical study is presented for the effects of chemical reaction and mass transfer on the free convective flow of a viscous ...

    An analysis of dielectric properties of synthetic ballast water at frequencies ranging from 300 to 3000 MHz

    Boldor, Dorin / Ortego, Jeffrey / Rusch, Kelly A. | Tema Archive | 2008
    operations (extremely large volumes of water, efficiency at destroying macro and micro organisms, environmental issues associated with chemical ...

    An Analysis of Parameters of an Oscillatory Chemical Reaction by Holography Methods Involving a Transient Reference Wave

    Borkova, V. N. / Kraiskii, A. V. / Zubov, V. A. | British Library Online Contents | 1998

    An analytical and experimental study of a hybrid rocket motor

    Rezaei, Hadi / Soltani, Mohammad Reza | Tema Archive | 2014
    The hybrid rocket motor is a kind of chemical propulsion system that has been recently given serious attention by various industries and ...