Design method of worn rail grinding profile based on Frechet distance method

You are here: Homepage > Search

Design method of worn rail grinding profile based on Frechet distance method

Lin, Fengtao / Zou, Liang / Yang, Yang / Shi, ZhenShuai / Wang, Songtao

Due to the large volume and high running density of railway freight lines, rail deterioration occur frequently. Thus, it is necessary to grind the rail in time to improve the wheel-rail relationship. The profile data of the worn rail were measured at different measuring points in a section, and the Frechet distance method was adopted to analyze the data. The representative profile reflecting the overall condition of rail wear in this section is obtained. Combined with NURBS curve theory, a fitting algorithm in which the rail profile with certain discrete points was established. Taking the reduction of the amount of grinding material removed as the objective function, setting wheel-rail matching characteristics, and the reduction of rail wear as the constraint conditions, a calculation model for rail grinding profile was established. The dynamic characteristics of standard profile CN75 and g grinding profile OP75 were analyzed by the vehicle track dynamics model. The results showed that compared with the standard profile CN75, the amount of grinding material removed of the grinding profile OP75 is reduced by 44.7%, and the height reduction of the rail top is reduced by 0.39 mm. After ${3 \times 10}^{4}$ km of running, the wear amounts of grinding profile OP75 is about 36.1%–36.5% less than that of standard profile CN75.In the small curve section, the derailment coefficient of grinding profile OP75 is reduced by 11.7% compared with that of standard profile CN75. The dynamic performance is improved. The grinding target profile has better dynamic characteristics and is beneficial to reduce wheel-rail wear.