Nine high laden articulated vehicle combinations from 32 tons (Mg) to 45 tons (Mg) gross train weight were driven into a roll over condition on different maneuvers to assess their stability in roll and the effect of different vehicle characteristics. The vehicles were also tilted sideways on a platform to the point of balance. Roll over occurred at lateral accelerations from about 0.2g. Trailer roll was the governing factor in the overturning of the combinations tested. Increased spring stiffness, spring base width and coupling stiffness increased the trailer roll resistance. Measurements demonstrated that the tilt method gave a good indication of roll stability. Calculated results from a computer program of lateral acceleration required for roll over differed from the dynamic results by 10 to 40 per cent. Roll over occurs in 3-4 per cent of heavy goods vehicle injury accidents. A higher percentage of articulated vehicles roll over than rigid vehicles. Reasons for this are considered to be geometric layout, lack of driver awareness of the total roll of an articulated combination and a tendency for a rigid vehicle to become self stabilizing due to loss of drive in roll. Multiple turn maneuvers did not increase the risk of roll over. A roll over warning device could be useful. (Copyright (c) Crown Copyright 1978.)
Articulated Vehicle Roll Stability: Methods of Assessment and Effects of Vehicle Characteristics
1978
45 pages
Report
No indication
English
Active roll control of an experimental articulated vehicle
Automotive engineering | 2005
|Validation of an articulated vehicle yaw/roll model
TIBKAT | 1993
|Active roll control of an experimental articulated vehicle
Online Contents | 2005
|Active roll control of an experimental articulated vehicle
SAGE Publications | 2005
|