search-head

Sie sind hier: Homepage >  Suche

SAE Technical Papers   Auswahl aufheben

Synonyme wurden verwendet für: electrical engineering • engineering
Suche ohne Synonyme: title: electrical engineering and electronic

1–20 von 245 Ergebnissen
|
Sortieren:

    Application of Computer Aided Engineering Tools for Insight into Electromagnetic Compatibility Characteristics of Electrical and Electronic Components for Automotive Systems

    Steffka, Mark / Piper, Scott / Patel, Vipul | SAE Technical Papers | 2017
    and vehicle electrical architecture is done early and correctly. Today, the first designs are done in the electronic format with circuit and ...
    Schlagwörter: CAD, CAM, and CAE

    CAN Bus Message Electrical Signatures for Automotive Reverse Engineering, Bench Marking and Rogue ECU Detection

    Quigley, Christopher / Charles, David / McLaughlin, Richard | SAE Technical Papers | 2019
    engineering process is concerned with moving a sensor and watching the CAN bus for message changes. For example, wind down a door window and see if ...
    Schlagwörter: Electronic control units

    Holistic Change Management in Automotive Electrical/Electronic Development using an Integrated Engineering Product and Process Model

    Watzenig, Daniel / Pölzlbauer, Florian | SAE Technical Papers | 2008
    integrate engineering product and process during passive safety system development within the vehicle electric/electronic (E/E) domain is proposed ...

    Reliability Physics Analysis of Electrical, Electronic, and Electromechanical Equipment, Modules and Components

    SAE Technical Papers | 2021
    recommended practice has been developed jointly by the SAE International Automotive Electronic Systems Reliability Standards Committee (AESRS) and the ...
    Schlagwörter: CAD, CAM, and CAE , Electronic equipment , Simulation and modeling , Failure modes and effects analysis

    Systems Engineering Approach to Electrical Wire Interconnection System (EWIS) Development

    Low, John | SAE Technical Papers | 2015
    in electronic and electrical content through their entire lifecycle. Relatively new mandates, such as the CFR Part 25 Subpart H EWIS, have ...
    Schlagwörter: Systems engineering

    The Shift from a Component-based to a Systems Engineering Approach for Electrical and Electronic Product Engineering at International Truck and Engine Corporation

    Aboyade, OJ | SAE Technical Papers | 2002
    , and associated methods are also discussed. The paper also highlights tools and techniques that support systems engineering. Additionally, the ...
    Schlagwörter: Systems engineering

    Hybrid Technique for Real-Time Simulation of High-Frequency-Switched Electrical Systems

    Miller, Chad / Walters, Eric / Wells, Jason et al. | SAE Technical Papers | 2016
    models of power-electronic systems in real-time, targeting simulation platforms that combine both FPGAs and CPUs, but can also be adapted to run ...
    Schlagwörter: Simulation and modeling

    Handbook for Robustness Validation of Automotive Electrical/Electronic Modules

    SAE Technical Papers | 2012
    Handbook for Robustness Validation of Automotive Electrical/Electronic Modules will help many companies and engineering teams make the transition ...
    Schlagwörter: CAD, CAM, and CAE , Electronic control units , Simulation and modeling , Failure modes and effects analysis

    Handbook for Robustness Validation of Automotive Electrical/Electronic Modules

    SAE Technical Papers | 2009
    Handbook for Robustness Validation of Automotive Electrical/Electronic Modules will help many companies and engineering teams make the transition ...
    Schlagwörter: CAD, CAM, and CAE , Simulation and modeling , Failure modes and effects analysis

    User’s Manual for Certification of Aircraft Electrical/Electronic Systems for the Indirect Effects of Lightning

    SAE Technical Papers | 2020
    -160/ED-14 Section 22. The FAA and EASA regulations apply to all adverse effects of lightning for electrical and electronic systems. Refer to ...
    Schlagwörter: Sensors and actuators , Electronic control systems , Failure modes and effects analysis , Computer software and hardware

    GOLD PLATING For Electronic and Electrical Applications

    SAE Technical Papers | 1991
    This specification covers the engineering requirements for electrodeposition of gold and the properties of the deposit. ...

    GOLD PLATING For Electronic and Electrical Applications

    SAE Technical Papers | 1980
    This specification covers the engineering requirements for electrodeposition of gold and the properties of the deposit. ...

    Electrical System Load Management for High Power Work Lights Using Light Type Detection through Signature Recognition Technique

    Pawar, Sanket | SAE Technical Papers | 2015
    lights and also on the entire electrical system of the vehicle. It is possible to prevent the system from getting over loaded by employing ...
    Schlagwörter: Electronic control units , Electrical systems

    SAE J3168: A Joint Aerospace-Automotive Recommended Practice for Reliability Physics Analysis of Electrical, Electronic and Electromechanical Components

    Locker, David / McLeish, James / Hodgson, Keith et al. | SAE Technical Papers | 2019
    expected durability life of Electrical, Electronic and Electromechanical components and equipment, due to stresses such as mechanical shock ...
    Schlagwörter: CAD, CAM, and CAE

    System Security and System Safety Engineering: Differences and Similarities and a System Security Engineering Process Based on the ISO 26262 Process Framework

    Czerny, Barbara J. | SAE Technical Papers | 2013
    engineering process to the development of cyber-physical automotive systems is beneficial and will help reduce the likelihood of successful attacks on ...

    Polyurethanes: A Different Breed of Electrical and Electronic Insulating Materials

    Simon, Thomas S. | SAE Technical Papers | 1976
    epoxies and silicones for the dielectric insulation of electrical and electronic solid state systems in the modern automobile. ...

    Contacts, Electrical Connector, General Specification for

    SAE Technical Papers | 2022
    This specification covers the general requirements for removable crimp, solderless wrap, and solder type electrical contacts for use in ...
    Schlagwörter: Connectors and terminals , Electronic equipment

    Driver Distraction/Overload Research and Engineering: Problems and Solutions

    Green, Paul A. | SAE Technical Papers | 2010
    engineering and their solutions are addressed in this paper. Problems include (1) the misuse of the term distraction (and possible misdirection of ...
    Schlagwörter: Research and development

    Survey of Concerns in Embedded Systems Requirements Engineering

    Aceituna, Daniel | SAE Technical Papers | 2013
    requirements engineering of embedded software systems, including the need to elicit, specify, and validate, interrupts and exceptions, concurrency, and ...
    Schlagwörter: Research and development , Computer software and hardware

    Systems Engineering Approach for Voice Recognition in the Car

    Ji, An / Richardson, Brigitte / Huber, John et al. | SAE Technical Papers | 2017
    In this paper, a systems engineering approach is explored to evaluate the effect of design parameters that contribute to the performance of ...
    Schlagwörter: Systems engineering , Heating, ventilation, and air conditioning systems (HVAC) , Seats and seating

Ergebnisse anzeigen
10 50

Suchergebnisse filtern