Wide-bandgap (WBG) semiconductor power devices have good potential for operating at higher temperatures compared to Si-based electronics. Silicon carbide (SiC) currently represents a good WBG candidate for use in developing power MOSFETs and Schottky diodes used in power conditioning and control electronics that are required for the next generation More Electric Aircraft (MEA). To that end, SiC Schottky and p+n diodes were examined; the SiC Schottky diode is important for use in power switching applications due to its fast reverse recovery times. Faster switching times lead to lower power losses, which in turn dissipates less heat. The SiC p+n diode is the basic voltage blocking structure in the SiC MOSFET. Forward and reverse bias static and dynamic characteristics were obtained for 4H-SiC p+n diodes in vacuum at temperatures in the range of 298 K to 698 K. Static characteristics revealed a decrease in forward threshold voltage from 2 volts at 298 K to 1.25 volts at 698 K; similar behavior was also observed for 6H-SiC Schottky diodes as a function of temperature. Dynamic measurements yielded low frequency (100 KHz) rectifier efficiencies of 38% for the SiC Schottky diodes over the temperature range 298 K -273 K, compared to 34% for the SiC p+n diodes. Data was also obtained for diode power dissipation versus duty cycle and temperature. It is believed that an error exists in the authors' experimental setup for power dissipation.
Static and dynamic characteristics of 4H-SiC p+n and 6H-SiC Schottky diodes
1997
5 Seiten, 7 Quellen
Aufsatz (Konferenz)
Englisch
Schottky diodes on nanowires of copper phthalocyanine
Online Contents | 2010
|SOLUTIONS - Semiconductors & ICs - Carbon-Nanotube Schottky Diodes
Online Contents | 2006
New process produces high-power Schottky diodes
NTRS | 1977
|