Autonomous vehicles aim to improve driving safety and comfort. In autonomous car SAE level-3 operations, it is necessary to determine whether the driving authority can be transferred from the computer to the driver. The driver must be awake and sufficiently alert to switch to manual driving operation. Physiological measurement methods require sensors that are in contact with the human body. These sensors are annoying, frustrating, and inconvenient for the driver. The purpose of this study is to determine a driver’s condition using eye-closing time and yawning frequency by a visible-light camera and a thermal camera. Eye-closings and yawns were detected using an appropriate non-contact detector with a visible camera and thermal camera. When a visible-light camera was used, the driver state recognition rate was 90 % or higher when the driver’s surroundings were brightly lit, but the recognition rate decreased significantly to approximately 4 % when the surroundings were dark. Using a thermal camera, the face recognition rate was 74 % under bright and dark conditions. For the thermal images, DLib and OpenCV could be performed well. Therefore, the DLib and thermal image combination could be used for a reliable driver drowsiness detection task.
Driver-Condition Detection Using a Thermal Imaging Camera and Neural Networks
Int.J Automot. Technol.
International Journal of Automotive Technology ; 22 , 6 ; 1505-1515
2021-12-01
11 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
DRIVER CONDITION DETECTION DEVICE AND DRIVER CONDITION DETECTION METHOD
Europäisches Patentamt | 2019
|Driver condition detection device and driver condition detection method
Europäisches Patentamt | 2020
|DRIVER CONDITION DETECTION DEVICE AND DRIVER CONDITION DETECTION METHOD
Europäisches Patentamt | 2017
|Springer Verlag | 2015
|Driver Drowsiness Detection Using Convolution Neural Networks
Springer Verlag | 2021
|