The Mars2020 entry vehicle is currently being developed by NASA to safely land its next rover on the Martian surface in 2021. During entry, the vehicle will be protected from aerothermal environments using a PICA (Phenolic Impregnated Carbon Ablator)-tiled heatshield. PICA loses mass through surface recession and in-depth pyrolysis as it is heated. Pre-flight knowledge of heatshield mass loss is required for vehicle balancing during critical mission events. This study attempts to predict the total mass loss experienced by the Mars2020's heatshield during its entry. A grid was created over the half of the heatshield which generated 108 points across a total of 9 spokes. Aero-thermal environments were provided from CFD (Computational Fluid Dynamics) calculations that considered a baselined trajectory. The TPS (Thermal Protection System) stack was a build-up of composite, aluminum, composite, an HT-424 bond, followed by PICA. The FIAT (Fully Implicit Ablation, Thermal-response) 1-D analysis utilized this TPS stack and the CFD environments and was run at each grid point giving mass flux information from the point of atmospheric entry until parachute deployment. The mass flux due to recession and pyrolysis gas was summed and integrated first through time and then across the half heatshield using a polar integration tool. The mass loss results were mirrored to the other half of the heatshield to calculate total mass loss throughout the entry phase of flight. This total mass loss value and its distribution was used by entry vehicle designers to account for CG (Center of Gravity) offset during parachute descent when the heatshield is no longer losing significant mass.
Estimation of Heatshield Mass Loss for Mars 2020 Entry Vehicle
AIAA Aviation and Aeronautics Forum (Aviation 2018)
;
2018
;
Atlanta, GA, United States
AIAA/ASME Joint Thermophysics and Heat Transfer Conference (2018)
;
2018
;
Atlanta, GA, United States
2018-06-25
Sonstige
Keine Angabe
Englisch
On Heatshield Shapes for Mars Entry Capsules
AIAA | 2012
|On Heatshield Shapes for Mars Entry Capsules
British Library Conference Proceedings | 2012
|Inverse Estimation of the Mars Science Laboratory Entry Aeroheating and Heatshield Response
Online Contents | 2015
|