Modifications were incorporated into a helicopter active transmission isolation system to provide the capability of utilizing the system as a rotor force measuring device. These included; (1) isolator redesign to improve operation and minimize friction, (2) installation of pressure transducers in each isolator, and (3)en1 load cells in series with each torque restraint link. Full scale vibration tests performed during this study on a CH-53A helicopter airframe verified that these modifications do not degrade the systems wide band isolation characteristics. Bench tests performed on each isolator unit indicated that steady and transient loads can be measured to within 1 percent of applied load. Individual isolator vibratory load measurement accuracy was determined to be 4 percent. Load measurement accuracy was found to be independent of variations in all basic isolator operating characteristics. Full scale system load calibration tests on the CH-53A airframe established the feasibility of simultaneously providing wide band vibration isolation and accurate measurement of rotor loads. Principal rotor loads (lift, propulsive force, and torque) were measured to within 2 percent of applied load. (Author)
Active Transmission Isolation/Rotor Loads Measurement System
1973
139 pages
Report
Keine Angabe
Englisch
Correlation of SMART Active Flap Rotor Loads
British Library Conference Proceedings | 2009
|The RSRA Active Isolation/Rotor Balance System
NTRS | 1978
|Enhanced Correlation of SMART Active Flap Rotor Loads
AIAA | 2011
|Enhanced Correlation of SMART Active Flap Rotor Loads
British Library Conference Proceedings | 2011
|