AbstractWith regard to hypervelocity impact detection, a sensor network that can be applied on typical spacecraft structures is under development at Fraunhofer EMI (Ernst-Mach-Institut), supported by OHB-System. For impact detection, acoustic transducers are used. The structure types investigated are a 2mm thick plate from aluminium alloy and a 49mm thick sandwich panel with aluminium face-sheets and aluminium honeycomb core. One impact test was performed on each of the panels, which were instrumented with 6 ultrasonic transducers. The signals recorded at the various sensor locations varied with regard to peak amplitude and elapse time of the signal. Using this information and combining it with a localization algorithm, the impact location could be successfully determined. A description of the impact sensor network and the mathematical model to determine the impact location is provided. The impact tests on the spacecraft structure, the response of the sensor network and the analysis performed to determine the impact location are described.
Impact sensor network for detection of hypervelocity impacts on spacecraft
Acta Astronautica ; 61 , 10 ; 901-911
2007-02-05
11 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Impact sensor network for detection of hypervelocity impacts on spacecraft
Online Contents | 2007
|Impact Sensor Network for Detection of Hypervelocity Impacts on Spacecraft (IAC-04-IAA.5.12.2.04)
British Library Conference Proceedings | 2005
|Hazards of Hypervelocity Impacts on Spacecraft
AIAA | 2002
|RF Signatures of Hypervelocity Impacts on Spacecraft
AIAA | 2011
|Computing Effects of Hypervelocity Impacts on a Spacecraft
Online Contents | 1995