Tensile behavior of composite patched cracked metallic structures
Temperature sensitivity of solid propellant burning rate.
Temperature measurement in a CW HF chemical laser plenum
Temperature Evolution of Spark Kernels at Subatmospheric Pressures
The effects of decreasing pressure on the spatial and temperature evolution of spark kernels are reported in this work. This effort is
...Temperature Estimates of Exhaust Plumes from a Turbine Driven by Pulsed Detonations
Temperature distribution within a particle during evaporation.
Temperature and pressure influence on explosion pressures of closed vessel propane-air deflagrations
TECHNOLOGIES AND MICROSTRUCTURES FOR SEPARATION TECHNIQUES IN CHEMICAL ANALYSIS
Techniques for the study of the combustion of metals.
Techniques for space LIDAR sensing of the global atmospheric environment
Techniques for Solving Stiff Chemical Kinetics on Graphical Processing Units
The cost of integrating detailed finite rate chemical kinetics mechanisms can be prohibitive in turbulent combustion simulations
...Techniques for Solving Stiff Chemical Kinetics on Graphical Processing Units
TECHNICAL NOTES - Reaction Rates for Hypergolic Propellants Using Chemical Delay Times
Technical Considerations for Catalysts for the European Market
Tanker Truck Rollover Avoidance Using Learning Reference Governor
Most models for the study of near-road air quality are based on either steady-state Gaussian equations or Lagrangian puff formulations
...
Tailoring Ethanol High Temperature Ignition by Means of Chemical Additives and Water Content
System Requirements for Electrically Conductive Concrete Heated Pavements
Ice and snow on airport pavements can contribute to flight cancellations and delays. Traditional deicing methods that involve chemical
...Synthesis of Gd2SiO5 nano-powders by cocurrent chemical co-precipitation method
Synthesis, Characterization, and Mechanical Properties of Red Mud–Based Geopolymers
Synthesis and Characterization of Belite-rich Cement by Exploiting Alumina Sludge
Sustainable Aviation Fuels Approval Streamlining: Auxiliary Power Unit Lean Blowout Testing
An underpinning hindrance in the market penetration of sustainable aviation fuel is the approval process for alternative jet fuels. One
...Sustainability of the in situ bio-barriers for contaminant containment in residual soils
Bio-barrier is a promising new technology to contain subsurface contaminant plume by manipulation of hydraulic
...Surveyor Vernier engine fuel blend - A constrained optimization.
Survey and Performance Evaluation of Small-Satellite Propulsion Technologies
Surface water quality assessment in the central part of Bangladesh using multivariate analysis
Surface Tension and Contact Angle Analysis with Design of Propellant Measurement Apparatus
Propellant management devices located within the propellant tanks of spacecraft and satellites operating in microgravity environment are
...Surface Tension and Contact Angle Analysis with Design of Propellant Measurement Apparatus
Surface Temperature of Agglomerated Aluminum Particles in a Reaction Zone
Aluminum particles are used as a metal fuel to increase the propulsion performance of composite propellants in solid rockets. As such
...Surface composition of solid-rocket exhausted aluminum oxide particles
Surface chemical effects have great influence on the prediction of hypersonic nonequilibrium aerodynamic heating, and they are
...Suppression of Hard Start for Nontoxic Hypergolic Thruster Using Oxidizer
The present paper describes the phenomenon of hard start observed from a demonstrator of 500 N scale nontoxic hypergolic thruster using
...Supersonic Combustion and Flame Stabilization of Coflow Ethylene and Air with Splitter Plate
Supersonic Combustion and Flame Stabilization of Coflow Ethylene and Air with Splitter Plate
Superiority and failure mode of automotive batteries insulated with polyethylene separators
Sulfur Poisoning of a Cu-SSZ-13 SCR Catalyst under Simulated Diesel Engine Operating Conditions
Subsatellite studies of wave, plasma, and chemical injections from Spacelab
Sublimating chemical technique for boundary-layer flow visualizationin flight testing
Study on volume stability of chemical foaming cement paste
Study on volume stability of chemical foaming cement paste
Study on axial force and its distribution for a newly developed block-type CVT belt
Study of the boundary layers in chemical laser nozzles