1–20 von 20 Ergebnissen
|

    A dynamic model for the drive and electro-mechanics of a solenoid based electronic fuel injector

    Lillington, Richard / Chetwynd, Derek / Jones, R. Peter | SAGE Publications | 2019

    A mixed model to evaluate random hardware failures of whole-redundancy system in ISO 26262 based on fault tree analysis and Markov chain

    Wang, Tong / Chen, Xi / Cai, Zhikai et al. | SAGE Publications | 2019
    In order to ensure safety and reliability, some safety-related electrical and electronic (E/E) systems in vehicles need to be designed as a ...

    Design and optimization of a cam-actuated electrohydraulic brake system

    Durali, Laaleh / Khajepour, Amir / Jeon, Soo | SAGE Publications | 2018
    electrohydraulic brake system is a combination of an electrical component, a mechanical component and a hydraulic component. The unique feature of the ...

    Design and testing of a series hybrid vehicle with an ultracapacitor energy buffer

    Ganley, Jason C | SAGE Publications | 2012
    series hybrid. The vehicle is refitted with a gasoline engine generator set and ultracapacitor-only electrical storage system. A detailed ...

    Design of hazard identification system for aircraft power supply system based on SIMPLORER and MATLAB co-simulation

    Zhou, Di / Zhuang, Xiao / Huang, Yan et al. | SAGE Publications | 2020
    The aircraft power supply system provides power for all the electrical equipment on the aircraft. Its normal operation is the key to ensure ...
    Schlagwörter: electronic-device failures , Aircraft electrical system

    Development of a hardware-in-the-loop simulation system for power seat and power trunk electronic control unit validation

    Yu, Jungkyum / Kim, Kwangil / Yi, Kyongsu | SAGE Publications | 2019
    signal logic between the electronic control unit and the model. In addition, the electrical robustness of the electronic control unit was ...

    Development of a Heavy-Duty Engine Test Cycle Representative of On-Highway Not-To-Exceed Operation

    Krishnamurthy, M / Gautam, M | SAGE Publications | 2006
    the emissions behaviour during on-road NTE operation, electronic control module calibrations, and engine development. The results indicate ...

    Development of a new calibration and monitoring system for in-vehicle electronic control units based on controller area network calibration protocol

    Wang, J-X / Feng, J / Mao, X-J et al. | SAGE Publications | 2005
    An interactive user-friendly calibration and monitoring system is critical for the development of electronic control units (ECU). In this ...
    Schlagwörter: electronic control units (ECU)

    Development of a Power Net simulation tool using SABER®

    Boulos, A M / Pickering, S R / Gerke, T et al. | SAGE Publications | 2007
    . The electric power system of a modern vehicle has to supply enough electrical energy to drive numerous electrical and electronic systems and ...
    Schlagwörter: electrical loads

    Electronic control unit modelling for automotive wire harness simulation using the Capital Harness system

    Kim, J H / Lee, J C / Park, J et al. | SAGE Publications | 2011
    With an increase in the number of electrical systems installed in vehicles, the wire harness design has become increasingly complicated and ...
    Schlagwörter: electronic control unit

    Electronic control units for automotive electrical power systems: Communication and networks

    Shrinath, A / Emadi, A | SAGE Publications | 2004
    complex and difficult to be implemented are not only being provided but various other facilities are also being built on those very functions ...
    Schlagwörter: automotive electrical systems , electronic control units

    Fast optimization of mechanical designs using computer aided design/computer aided engineering emulation: A case study

    Bates, R. A. / Gilliver, R / Hughes, A et al. | SAGE Publications | 1999
    The use of emulator methods in mechanical engineering design is more limited than in electrical and electronic engineering. The concept is ...
    Schlagwörter: engine and engine component , computer aided engineering , robust engineering design

    Heavy-duty engine electric turbocompounding

    Kant, Manuel / Romagnoli, Alessandro / Mamat, Aman MI et al. | SAGE Publications | 2015

    Influence of sensor and communication setup on electric cam phaser control quality

    Andert, Jakob / Sohn, Christian / Klein, Serge et al. | SAGE Publications | 2019
    conventional electronic control units are evaluated. Communication latencies have a strong impact on the control plant and are taken into account ...

    Laser-assisted Direct Write for aerospace applications

    Sato, T / Fearon, E / Curran, C et al. | SAGE Publications | 2010
    Particulate silver inks are finding increasing use in the direct manufacture of electronic circuitry, for example in Direct Write (DW ...

    Modelling and optimizing automotive assembly plant flash-programming time

    Shi, J / Rosa, C H | SAGE Publications | 2008
    As automotive companies standardize their electronic control units (ECUs) on a common electrical architecture across all vehicle platforms ...

    Study of electric arc parameters during the extraction phase for automotive connectors

    El Abdi, R / Elmanfalouti, A / Benjemaa, N | SAGE Publications | 2006
    environment are many factors that are included in the new generation of vehicles. The increase in the number of electronic and electric systems leads ...
    Schlagwörter: electrical contact

    The automotive connector: The influence of powering and lubricating a fretting contact interface

    Swingler, J | SAGE Publications | 2000
    The increasing amount of telematic and other electronic systems in the modern motor vehicle demands higher performance and reliability in ...
    Schlagwörter: electrical contacts

    Validation of battery-alternator model against experimental data-a first step towards developing a future power supply system

    Boulos, A M / Pacaud, C / Burnham, K J et al. | SAGE Publications | 2004
    The electric power system of a modern vehicle has to supply enough electrical energy to drive numerous electrical and electronic systems ...

    Vehicle Electrical Power Supply Systems and Their Impact on System Design

    Williams, G A / Holt, M J | SAGE Publications | 1992
    The electrical power system is the vital lifeline to most of the control systems on modern automobiles. The following general trends are ...