1–50 von 5,995 Ergebnissen
|

    1D Modeling of Alternative Fuels Spray in a Compression Ignition Engine Using Injection Rate Shaping Strategy

    Perozziello, Carmela / Mancaruso, Ezio / Sequino, Luigi | SAE Technical Papers | 2019
    strategies has been set up for the Injection Rate Shaping. Experimental data collected in an optical single-cylinder compression ignition research ...

    2D/3D Painted TPO Fascia Testing to Mimic Real World Friction Induced Damage by Cohesive and Delamination Failures

    Ramamurthy, A. C. / Mihora, Dennis J. / Venditto, Virgil A. | SAE Technical Papers | 1998
    forces exceeding 5000. N. 2D tests provide the cost effective approach to materials research by isolating the failure mechanics in the upper 250 ...
    Schlagwörter: Research and development

    3D CFD Analyses of Intake Duct Geometry Impact on Tumble Motion and Turbulence Production in SI Engines

    Iorio, Agostino / Romagnuolo, Luca / Maresca, Luigi et al. | SAE Technical Papers | 2017
    In recent years, engine manufacturers have been continuously involved in the research of proper technical solutions to meet more and more ...

    3DCFD-Modeling of a Hydrogen Combustion-Process with Regard to Simulation Stability and Emissions

    Dafis, Aristidis / Rottengruber, Hermann / Jochmann, Paul | SAE Technical Papers | 2023
    In the context of the energy transition, CO2-neutral solutions are of enormous importance for all sectors, but especially for the mobility ...
    Schlagwörter: Research and development

    3D Computational Methodology for Bleed Air Ice Protection System Parametric Analysis

    Silva, Daniel / Domingos, Rodrigo | SAE Technical Papers | 2015
    shape computation. The icing tunnel data used in the validation of the proposed computer model were obtained at the NASA Icing Research Tunnel ...

    3-Dimensional Simulation of Vehicle Response to Tire Blow-outs

    Day, Terry D. / Grimes, Wesley D. / Blythe, William | SAE Technical Papers | 1998
    model by direct comparison with experiments conducted at the Transportation Research Center (TRC), in East Liberty, Ohio. The paper also ...

    3-D Modeling of Diesel Engine Intake Flow, Combustion and Emissions

    Rutland, C.J. / Reitz, Rolf D. | SAE Technical Papers | 1991
    research efforts towards improving the performance of diesel engines. The objective of the present program is to develop a comprehensive analytical ...

    3D Modelling and Photographic Investigation of Combustion in Hydra DI Diesel Engine

    Winterbone, D. E. / Moses, E. / Rao, K. K. | SAE Technical Papers | 1996
    High speed photographs of spray and combustion, obtained from a Hydra direct injection research diesel engine are compared with the ...
    Schlagwörter: Research and development

    3D Simulations And Experimental Validation of High EGR - PHCCI Combustion

    de Risi, A. / Laforgia, D. / Zurlo, S. et al. | SAE Technical Papers | 2007
    , obtained by the application of EGR up to 60% without using detailed kinetic models. In particular, the laminar and turbulent time characteristic ...

    4WS Technology and the Prospects for Improvement of Vehicle Dynamics

    Kuroki, Junsuke / Irie, Namio | SAE Technical Papers | 1990
    FOUR-WHEEL STEERING (4WS) is beginning to find widespread use as a new approach to improving vehicle dynamics, especially in the medium and ...
    Schlagwörter: Research and development

    6DOF Metrology-integrated Robot Control

    Kihlman, Henrik / Loser, Raimund | SAE Technical Papers | 2003
    operations and for dynamic force compensation. To detect and compensate deflection in industrial robots during a process, the robot uses a metrology ...
    Schlagwörter: Research and development

    42 Volt System

    Lu, Steven | SAE Technical Papers | 2001
    system as standard. In the U.S., that number (42 volts) was selected by an industry-wide research consortium led by the Massachusetts Institute ...

    135 Days in Isolation and Confinement: The Hubes Simulation

    Bichi, Alessandro F. / Vaernes, Ragnar J. | SAE Technical Papers | 1995
    by integration of 31 experiments from more than 80 research proposals from Principal Investigators from Europe, USA and Russia, in domains of ...
    Schlagwörter: Research and development

    980 XK: A Critical Automotive Application for HSLA Steel

    Jurkowski, John J. / Keller, Robert N. | SAE Technical Papers | 1977
    and have been successfully incorporated in production operations. ...

    1970s Development of 21st Century Mobile Dispersed Power

    Eltinge, Lamont | SAE Technical Papers | 1973
    supplies in the United States and will do so for the world before 2000; this portends major changes and cost increases.The twenty-first century ...
    Schlagwörter: Research and development

    1971 Cars and the “New” Gasolines

    Rogers, J. D. / Poskitt, R. W. / Morris, W. E. | SAE Technical Papers | 1971
    in the same cars to obtain further insight into the effects of research octane number, motor octane number, and lead content on road octane ...

    1978 U. S. Automotive Service Market: How Large is Large?

    DeWeese, Lemuel Carroll | SAE Technical Papers | 1981
    The size of the 1978 automotive service market is the total dollars spent on car and truck repair and maintenance in 1978. The 1978 ...

    1990 Clean Air Act Impacts on Finishing Technology and Operations in the Medium and Heavy Duty Truck & Bus Industry

    Schultz, Karl R. | SAE Technical Papers | 1995
    The Clean Air Act Amendments of 1990 have brought about wholesale changes in the mandated requirements for the EPA and states to bring ...

    4994 Tractor Hydraulic System

    Palmersheim, G.M. | SAE Technical Papers | 1984
    J I Case Company has produced four-wheel-drive agricultural tractors since 1964. In 1984 however, the flagship of the Case fleet changed ...

    9000T Series John Deere Track Tractors

    Cote, Brad / Niebuhr, Dan / Kreis, Ed et al. | SAE Technical Papers | 2000
    425-HP 9400T tractors were designed with input from customers to meet customers' needs. Through customer input, on-farm research, and common ...
    Schlagwörter: Research and development

    A 2-D Computational Model Describing the Heat Transfer, Reaction Kinetics and Regeneration Characteristics of a Ceramic Diesel Particulate Trap

    Opris, Cornelius N. / Johnson, John H. | SAE Technical Papers | 1998
    parametric study performed in this research indicated that an optimum trap configuration can be achieved by changing the material properties (e.g ...

    AAH, The Latest Development in Microgravity Animal Research

    Emmerich, Jeffery C. / Iverson, Jeffery T. / Lee, Mark C. | SAE Technical Papers | 2005
    The Advanced Animal Habitat (AAH) represents the next generation of Space Station based animal research facilities. Building upon ...
    Schlagwörter: Research and development

    AARS: The Automated Aircraft Rework System

    Benoit, Michael J. | SAE Technical Papers | 1995
    The Mercer Engineering Research Center (MERC), under contract to the United States Air Force (USAF), was responsible for providing the ...

    A Bench Test Study of Port Fuel Injection Fouling

    Bennett, Joshua J. / Miller, Keith T. / Hou, Peter W. et al. | SAE Technical Papers | 2008
    Bench Procedure”, was developed by South West Research Institute (SWRI) and the procedure standardized by the Coordinating Research Council (CRC ...

    A Building for Testing European Rovers and Landers under Simulated Surface Conditions: Part 1 - Design and Phasing

    Nixon, David / Ovrum, Truls | SAE Technical Papers | 2008
    first support the European ExoMars mission due for launch in 2013. This mission will deliver a robotic rover to the Martian surface. This paper ...

    Academic Principles of Human Space Habitat Design

    Klaus, David M. / Higdon, Kevin P. | SAE Technical Papers | 2009
    consumables, remove undesirable waste products, and maintain environmental conditions that are conducive to life, health and operations. Propulsive ...

    A Calculation Procedure for the Evaluation of Cold Emissive Behavior of High-Performance Motorcycles

    Senatore, Adolfo / Prati, Maria Vittoria / Iodice, Paolo | SAE Technical Papers | 2011
    All the experimental investigations performed in the last years on newly sold motorcycles, equipped with a three-way catalyst and ...

    A Case for Open Source in Automotive Embedded Systems

    Devi, L Yaamini / Gopalakrishnan, S | SAE Technical Papers | 2005
    The role of Embedded systems is becoming more and more dominant in the Automotive segment. The proprietary products and Commercial-Off-The ...
    Verlag: Society of Automotive Engineers , The Automotive Research Association of India

    A Case for RFID in Indian Automotive Industry

    Ansari, Ashfaque Ahmed / Murali, S / Natarajan, Venkatesh | SAE Technical Papers | 2005
    data flow in supply chain could be one of the most significant developments. This paper presents the case for RFID implementation in automotive ...
    Verlag: Society of Automotive Engineers , The Automotive Research Association of India

    A Case Study of Stormwater Runoff Containing Deicing / Anti-icing Fluids Treatment at DFW Airport

    Bergman, Daniel / Stover, Enos L. / Walls, Sarah K. | SAE Technical Papers | 2003
    wintertime operations. DFW Airport has implemented best management practices for pollution prevention measures relating to deicing/anti-icing ...

    A Case Study on Effect of Subsequent Operations on Shot Peened Crown Wheel Pinion (Hypoid Gear Set) & Compressive Residual Stress Analysis

    Rao, Yathish | SAE Technical Papers | 2021
    ]. In this particular case- six CWP are taken for the study to understand the effect of the operations after shot peen process. Three Samples ...
    Schlagwörter: Research and development

    Accelerated Isothermal Material Life Test Based on Equal Sample Degradation States

    Daniels, George / Gurunatha, Tim | SAE Technical Papers | 1999
    degradation, is based. Data on material activation energy is now usually available, although some research effort is often required to find it ...
    Schlagwörter: Research and development

    Accelerated Life Testing of Push Fit Couplings for Climate Control and Fuel Line Applications

    Stevenson, A. / Harrison, C. | SAE Technical Papers | 1998
    Push fit couplings are becoming increasingly popular for vehicle climate control systems due to the simplicity of assembly operations that ...

    Accelerate Technical & Commercial Advancement using Computer-Aided Innovation (CAI) and Value Engineering (VE)

    Zaal, Gerard J. / Harris, Ronald L. / Ikovenko, Sergei | SAE Technical Papers | 1998
    and methodology (TechOptimizer™) is referred to in this paper because the author is unaware of a generic counterpart. CAI correlates with the ...
    Schlagwörter: Research and development

    Accelerometers Equivalency in Dummy Crash Testing

    Pritz, Howard / Elias, Jeff / Samaha, Randa Radwan et al. | SAE Technical Papers | 1996
    different manufacturers. These research efforts are within the general guidelines on transducer equivalency outlined in the current revision of the ...
    Schlagwörter: Research and development

    Accessing Japan's High Tech Progress: Guidelines for Auto Industry Pathfinders

    Rubinger, Bruce / Weiner, Susan B. | SAE Technical Papers | 1986
    available information in Japan on automotive technology. Sources include trade fairs, patents, trade publications, business newspapers, government ...
    Schlagwörter: Research and development

    Access Systems for Partial Gravity Exploration & Rescue: Results from Prototype Testing in an Analog Environment

    Rafiq, A. / Hodgson, E. / Jones, J. et al. | SAE Technical Papers | 2007
    An EVA simulation with a medical contingency scenario was conducted in 2006 with the NASA Haughton-Mars and EVA Physiology System and ...
    Schlagwörter: Research and development

    Accident Analysis and Measures to Establish Compatibility

    Zobel, Robert | SAE Technical Papers | 1999
    The vehicle fleet differs in mass, geometry, stiffness and many other parameters. These differences are consequences of different design ...
    Schlagwörter: Research and development

    Accident Analysis of a Two-Lane National Highway in India

    Tiwari, Geetam / Naqvi, Hasan M. | SAE Technical Papers | 2015
    reasons and non-availability of adequate research work on identification of causes of road accidents on two-lane National Highways in India, this ...
    Schlagwörter: Research and development

    ACCIDENT INFORMATION SYSTEM (AIS)

    ARAVIND, C. / KALIVARATHAN, G. | SAE Technical Papers | 2009
    and discoveries. The present global scenario has wiped out all the hurdles faced in the field of manufacturing and production. As it is ...
    Verlag: Society of Automotive Engineers , The Automotive Research Association of India

    Accident Scenarios on Indian Roads: A Study of Driver Behaviour and Road Infrastructure, based on data collected by ADAC

    Agrawal, Pradeep / Padhy, Sitikantha / Yadav, Yoginder | SAE Technical Papers | 2017
    Most of the time in motor vehicle accidents, the driver of the vehicle (especially driver of the larger vehicle in case of collision ...
    Schlagwörter: Crash research

    Accommodating Life Sciences on the Space Station

    Arno, Roger D. | SAE Technical Papers | 1987
    revolutionary way in which the Station will operate. Experiments will typically flow in a continuous series of 90 day cycles. The advantages of ...
    Schlagwörter: Research and development

    Accommodating Rodents During Extended Microgravity Missions

    Eodice, Michael T. | SAE Technical Papers | 1997
    development at NASAs Ames Research Center. Space Shuttle missions are currently limited in duration to just over two weeks. In contrast to this ...

    Accumulator Analysis of the Early External Active Thermal Control System for the International Space Station

    Delgado, Adon / von Arx, Alan | SAE Technical Papers | 2000
    A description is presented on how to perform fundamental analyses for accumulators used to maintain pressure control in closed-loop fluid ...

    Accuracy Assessment of the Major Constituent Analyzer

    Steiner, George / Granaham, John / McHard, Richard et al. | SAE Technical Papers | 2005
    safety-critical monitoring for special Environmental Control and Life Support (ECLS) operations such as Pre-Breathe in the Airlock for Extra ...

    Accurate Material Modeling and Analysis of Fiber-Filled Thermoplastics to Enable Light Weighting in Automotive Applications

    Thambi, Joel / Mallick, Roopali / Mohapatra, Subhransu et al. | SAE Technical Papers | 2022
    Usage of fiber-filled thermoplastics in automotive structural applications are increasing due to their inherent advantages over metal ...
    Schlagwörter: Research and development

    AC Electric Dynamometer System for End-of-Line Engine Hot Test

    Wu, Charles L. / Derr, James H. / Bradley, John E. | SAE Technical Papers | 1984
    demonstrated that an 80% reduction in test cycle stabilization time is possible when compared with the water brake dynamometer that is commonly used in ...

    A CFD Study of Losses in a Straight-Six Diesel Engine

    Leylek, James H. / Sommer, Randall G. / Jain, Sunil K. et al. | SAE Technical Papers | 1999
    Using a previously validated and documented CFD methodology, this research simulated the flow field in the intake region (inlet duct ...

    A Characterization of Accelerations Induced on the Free Floating Testbed During Parabolic Flight

    Borchers, Bruce / Blackwell, Charles / Edwards, Mark T. | SAE Technical Papers | 1995
    The goal of the Controlled Ecological Life Support System (CELSS) Program at NASA Ames Research Center is to develop life support systems ...

    A Chemical Containment Model for the General Purpose Work Station

    Flippen, Alexis A. / Schmidt, Gregory K. | SAE Technical Papers | 1994
    prior to post-flight analysis. The NASA-Ames Research Center SLS-2 payload, in particular, necessitated the use of several toxic, volatile ...