search-head

Sie sind hier: Homepage >  Suche

SAE Technical Papers   Auswahl aufheben
1–20 von 87 Ergebnissen
|
Sortieren:

    Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings and Forging Stock 18Cr - 11Ni - 0.60Cb (Nb) (347) Premium Aircraft Quality, Consumable Electrode Melted Solution Heat Treated

    SAE Technical Papers | 2023
    control during tensile testing (see 3.4.1.3), revises micro-inclusion rating method (see 3.4.4), adds quality requirements and associated guidance ...

    Steel, Corrosion-Resistant, Bars, Wire, Forgings, and Forging Stock, 17Cr - 0.50Mo (0.95 - 1.20C) (440F), Free-Machining, Annealed

    SAE Technical Papers | 2023
    result of a Five-Year Review and update of the specification. The revision updates the Title to match the Scope, adds recommended practices (1.2 ...
    Schlagwörter: Coatings, colorants, and finishes

    Aircraft Precipitation Static Certification

    SAE Technical Papers | 2023
    . The existing reports and guidance do not provide standards for aircraft design to control p-static or standard methods to verify acceptable ...

    GPS Coordinates Based Route Recognition and Predictive Functions

    jin, Chen / Dhruv, Dhaval / Golgar, Samrat | SAE Technical Papers | 2022
    DPF regeneration and another is predictive diagnosis of exhaust components, both aiming to improve the performance of emission control system ...
    Schlagwörter: Electronic control units , Control systems , Emissions control , Navigation and guidance systems

    Steel, Corrosion-Resistant, Bars, Wire, Forgings, Extrusions, Rings and Forging Stock 9.0Mn - 20Cr - 6.5Ni - 0.27N Solution Heat Treated

    SAE Technical Papers | 2022
    unauthorized exceptions (3.6, 4.4.3, 5.2.1.1, 8.5), updates the title to match the scope, adds AS1182 guidance (3.4.1, 8.6), updates composition tests ...
    Schlagwörter: Coatings, colorants, and finishes

    Steel Bars, Forgings, Mechanical Tubing, and Forging Stock 1.0Cr - 2.50Ni - 2.0Mo - 1.10Si (0.10 - 0.20C) Premium Aircraft-Quality Electroslag Remelted or Consumable Electrode Vacuum Remelted

    SAE Technical Papers | 2022
    . AMS6495C is the result of a Five-Year Review and update of the specification. The revision updates the title to match the scope, adds detail to ...
    Schlagwörter: Coatings, colorants, and finishes

    FPGA Implementation of In-Cycle Closed-Loop Combustion Control Methods

    Jorques Moreno, Carlos / Stenlaas, Ola / Tunestal, Per | SAE Technical Papers | 2021
    combustion control obtains feedback from fast in-cylinder pressure measurements for accurate and reliable information about the combustion progress ...
    Schlagwörter: Combustion and combustion processes , Sensors and actuators , Research and development

    Development of Adaptive-ECMS and predictive functions for Plug-in HEVs to Handle Zero-Emission Zones Using Navigation Data

    Capancioni, Alessandro / Perazzo, Alessandro / Brunelli, Lorenzo et al. | SAE Technical Papers | 2021
    decades. Moreover, since vehicle connectivity has spread more and more in the last years, a vehicle-to-network (V2N) communication system has been ...
    Schlagwörter: Navigation and guidance systems

    Approach to Landing Guidance System for Transport Aircraft

    SAE Technical Papers | 2020
    This document specifies requirements for an Approach to Landing Guidance System (ALGS) electronic device. This equipment shall display ...
    Schlagwörter: Air traffic control , Entry, descent, and landing , Navigation and guidance systems

    SCiNaS: A Smart City-Driven Navigation System to Catch Green Waves

    puliafito, Antonio / Scaffidi, Carlo / Tricomi, Giuseppe et al. | SAE Technical Papers | 2020
    Driving in modern cities is getting harder and harder due to the continuously changing road and traffic conditions, binding to navigation ...
    Schlagwörter: Cruise control , Navigation and guidance systems

    User’s Manual for Certification of Aircraft Electrical/Electronic Systems for the Indirect Effects of Lightning

    SAE Technical Papers | 2020
    This ARP provides detailed information, guidance, and methods in support of the Federal Aviation Administration (FAA) Advisory Circular (AC ...
    Schlagwörter: Sensors and actuators , Electronic control systems , Engine control systems , Failure modes and effects analysis , Computer software and hardware

    Nonlinear Model Predictive Control for Aggressive Cornering Maneuver Considering Effect of Large Steering Angle

    Kang, Jonggu / Lee, Jonghang / Ahn, Kyungjae et al. | SAE Technical Papers | 2019
    Herein, we describe a newly designed model predictive control algorithm. When we drive under condition of high speed and high steering, the ...

    Color Specification

    SAE Technical Papers | 2019
    This SAE Standard defines and provides a means for the control of colors employed in motor vehicle external lighting equipment, including ...
    Schlagwörter: Production control , Safety regulations and standards , Tools and equipment

    Flight in Icing Regulatory Evolution and the Influence on Aircraft Design

    Leopold, David | SAE Technical Papers | 2019
    adequate safety commensurate with the associated risk while balancing design complexity and efficiency. A review highlighting important aspects of ...
    Schlagwörter: Fly-by-wire control systems , Icing and ice detection

    Aerospace Fluid Power - FAA Regulatory History - Transport Airplane Hydraulic Systems

    SAE Technical Papers | 2019
    This SAE Aerospace Information Report (AIR) contains regulatory and guidance information related to transport airplane hydraulic systems ...
    Schlagwörter: Flight control actuators

    Cybersecurity Guidebook for Cyber-Physical Vehicle Systems

    SAE Technical Papers | 2016
    This recommended practice provides guidance on vehicle Cybersecurity and was created based off of, and expanded on from, existing practices ...
    Schlagwörter: Sensors and actuators , Electronic control units , Control systems , Failure modes and effects analysis

    Accuracy Analysis and Error Source Identification for Optimization of Robot Based Machining Systems for Aerospace Production

    Boehlmann, Christian / Schmidt, Hans Christian / Wollnack, Jörg et al. | SAE Technical Papers | 2016
    this approach is demonstrated in combination with the robot optimization strategies “real-time guidance with LaserTracker” and “control ...

    Contribution of 3D Printing in Tooling and Portable Tools Application Case for a Smart Driller

    Guerin, Sylvain / da Costa, Sylvain | SAE Technical Papers | 2016
    fully electrical with embedded 2-axis numerical control. It has a power of 2 kW for a total weight of 2.2 kg and only 4 structural parts ...
    Schlagwörter: Tools and equipment

    Electronic Flight Instrument System (EFIS) Displays

    SAE Technical Papers | 2016
    engine instrument, aircraft systems information/control. Control displays including communication, navigation and system control displays ...
    Schlagwörter: Flight guidance systems , Failure modes and effects analysis

    Practical Uses of Formal Methods in Development of Airborne Software

    Joyce, Jeffrey J. / Fabre, Laurent / Rajagopalan, Ramesh et al. | SAE Technical Papers | 2016
    achievable using “paper and pencil” analysis. In December 2011, RTCA published RTCA DO-178C [1] along with a set of technical supplements including ...
    Schlagwörter: Computer software and hardware

Ergebnisse anzeigen
10 50

Suchergebnisse filtern