search-head

Sie sind hier: Homepage >  Suche

SAE Technical Papers   Maschinenbau, Energietechnik   Chemische und Umwelttechnik   Auswahl aufheben

Synonyme wurden verwendet für: image • image processing • processing
Suche ohne Synonyme: keywords:(image processing)

1–50 von 438 Ergebnissen
|
Sortieren:

    A Study on the Effect of Debris Location on a Double Element Wing in Ground Effect

    Garmory, Andrew / Patel, Dipesh / Hodgson, Graham et al. | SAE Technical Papers | 2020
    Schlagwörter: Imaging and visualization

    Effects of Nozzle Geometry on the Characteristics of an Evaporating Diesel Spray

    Du, Chengjun / Andersson, Mats / Andersson, Sven | SAE Technical Papers | 2016
    Schlagwörter: Imaging and visualization

    Ash Permeability Determination in the Diesel Particulate Filter from Ultra-High Resolution 3D X-Ray Imaging and Image-Based Direct Numerical Simulations

    Sappok, Alexander / Kamp, Carl Justin / Monahan, Greg et al. | SAE Technical Papers | 2017
    Schlagwörter: Imaging and visualization

    Road Vehicles - Symbols for Controls, Indicators, and Tell-Tales

    SAE Technical Papers | 2023
    Schlagwörter: Imaging and visualization

    Multi-Wavelengths Michelson Interferometer Based Spatial Phase Shift Shearography with Color Camera

    Petry, Christopher / Schuth, Michael | SAE Technical Papers | 2019
    Schlagwörter: Imaging and visualization

    System for Strain-Distribution Visualization and Deformation Measurement of Tread Block under Fast-Rotating Tires

    Shishido, Hikari / Ishii, Kohei / Matsubara, Masami et al. | SAE Technical Papers | 2021
    Schlagwörter: Imaging and visualization

    Air Motion Induced by Ultra-High Injection Pressure Sprays for Gasoline Direct Injection Engines

    Yamaguchi, Akichika / Helmantel, Ayolt / Dillner, Johan et al. | SAE Technical Papers | 2020
    Schlagwörter: Imaging and visualization

    Investigation of Fuel Effects on Spray Atomization and Evaporation Studied for a Multi-hole DISI Injector with a Late Injection Timing

    Leipertz, Alfred / Schmitz, Ingo / Zigan, Lars et al. | SAE Technical Papers | 2011
    Schlagwörter: Imaging and visualization

    Effect of Off-Axis Needle Motion on Internal Nozzle and Near Exit Flow in a Multi-Hole Diesel Injector

    Pomraning, Eric / Battistoni, Michele / Xue, Qingluan et al. | SAE Technical Papers | 2014
    Schlagwörter: Imaging and visualization

    Dynamics of the Ammonia Spray Using High-Speed Schlieren Imaging

    Ojanen, Katriina / Larmi, Martti / Kaario, Ossi et al. | SAE Technical Papers | 2022
    Schlagwörter: Imaging and visualization

    PORT-FLUID CONNECTION, RING LOCKED INSERT, STANDARD DIMENSIONS FOR

    SAE Technical Papers | 2022
    Schlagwörter: Imaging and visualization

    Multi-Plane PIV Measurements in a Gasoline Direct Injection Engine

    Willman, Christopher / Virelli, Giuseppe / Shen, Li et al. | SAE Technical Papers | 2020
    Schlagwörter: Imaging and visualization

    BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, AMS5616, .190-32 UNJF-3A

    SAE Technical Papers | 2021
    Schlagwörter: Imaging and visualization

    TUBE END - BEADED, DESIGN STANDARD

    SAE Technical Papers | 2020
    Schlagwörter: Imaging and visualization

    BOLT, MACHINE - HEXAGON HEAD, PD SHANK UNS N07718, 185 KSI, .2500-28 UNJF-3A (STRESS RUPTURE RESISTANT)

    SAE Technical Papers | 2022
    Schlagwörter: Imaging and visualization

    Color and Height Characteristics of Surrogate Grass for the Evaluation of Vehicle Road Departure Mitigation Systems

    Shen, Dan / Lin, Jun / Li, Lingxi et al. | SAE Technical Papers | 2019
    Schlagwörter: Imaging and visualization

    BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN

    SAE Technical Papers | 2020
    Schlagwörter: Imaging and visualization

    Spray Formation from Spark-Eroded and Laser-Drilled Injectors for DISI Engines with Gasoline and Alcohol Fuels

    OudeNijeweme, Dave / Behringer, Markus / Freeland, Paul et al. | SAE Technical Papers | 2014
    Schlagwörter: Imaging and visualization

    BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, STEEL AMS6322, CADMIUM PLATED, .3125-24 UNJF-3A

    SAE Technical Papers | 2023
    Schlagwörter: Imaging and visualization

    A Numerical Study of Trailing Edge Serrations on Sunroof Buffeting Noise Reduction

    Zhuang, Mei / Wang, Zhenyu | SAE Technical Papers | 2017
    Schlagwörter: Imaging and visualization

    BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, 160 KSI UTS MIN, TI 6Al-4V (UNS R56400), .3125-24 UNJF-3A

    SAE Technical Papers | 2021
    Schlagwörter: Imaging and visualization

    BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, COBALT-NICKEL ALLOY UNS R30159, 260 KSI MIN

    SAE Technical Papers | 2022
    Schlagwörter: Imaging and visualization

    BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, AMS5708 (UNS N07001), .1900-32 UNJF-3A

    SAE Technical Papers | 2022
    Schlagwörter: Imaging and visualization

    BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, STEEL SAE 8740, CADMIUM PLATED, 125 KSI MIN. UTS, .4375-20 UNJF-3A

    SAE Technical Papers | 2020
    Schlagwörter: Imaging and visualization

    In-Process Hole and Fastener Inspection Using a High-Accuracy Laser Sensor

    Stansbury, Erin / Luker, Zachary | SAE Technical Papers | 2020
    Schlagwörter: Imaging and visualization

    Recent Developments in X-ray Diagnostics for Cavitation

    Kastengren, Alan / Swantek, Andrew / Powell, Christopher et al. | SAE Technical Papers | 2015
    Schlagwörter: Imaging and visualization

    BOLT, MACHINE - TEE HEAD, CHAMFERED CLASSIFICATION: 1210 MPA/730 °C CLOSE TOL SHANK, UNS N07001, METRIC

    SAE Technical Papers | 2021
    Schlagwörter: Imaging and visualization

    Laser-Induced Phosphorescence Thermography of Combustion Chamber Wall of Diesel Engine

    Kosaka, Hidenori / Aizawa, Tetsuya | SAE Technical Papers | 2008
    Schlagwörter: Imaging and visualization

    BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN

    SAE Technical Papers | 2020
    Schlagwörter: Imaging and visualization

    BOLT, MACHINE - SPLINE DRIVE HD CLOSE TOL FULL SHANK, AMS5662, METRIC

    SAE Technical Papers | 2022
    Schlagwörter: Imaging and visualization

    BOLT, SPLINE DRIVE EXTENDED WASHER HEAD, REDUCED HEAD, RETAINER LOCKED, PD SHANK, AMS5708, METRIC

    SAE Technical Papers | 2022
    Schlagwörter: Imaging and visualization

    SCREW, MACHINE, 100° CSK, FLAT HEAD, OFFSET CRUCIFORM RECESS, FULL SHANK, UNS S66286, MJ THREAD, METRIC

    SAE Technical Papers | 2021
    Schlagwörter: Imaging and visualization

    BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN

    SAE Technical Papers | 2020
    Schlagwörter: Imaging and visualization

    Experimental Assessment of a Novel Instrument for the Injection Rate Measurement of Port Fuel Injectors in Realistic Operating Conditions

    Buitoni, Giacomo / Caponeri, Giulio / Postrioti, Lucio et al. | SAE Technical Papers | 2017
    Schlagwörter: Imaging and visualization

    Experimental and Numerical Analyses of Liquid and Spray Penetration under Heavy-Duty Diesel Engine Conditions

    Somers, Bart / D'Errico, Gianluca / Hardy, Gilles et al. | SAE Technical Papers | 2016
    Schlagwörter: Imaging and visualization

    Multi-Objective Classification of Three-Dimensional Imaging Radar Point Clouds: Support Vector Machine and PointNet

    Bai, Jie / Long, Kai / Dong, Lianfei et al. | SAE Technical Papers | 2021
    Schlagwörter: Imaging and visualization

    BOLT, TEE HEAD, CHAMFERED - CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A

    SAE Technical Papers | 2022
    Schlagwörter: Imaging and visualization

    WRENCHING ELEMENT SPLINE DRIVE - DIMENSIONS FOR

    SAE Technical Papers | 2022
    Schlagwörter: Imaging and visualization

    SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .1380-40 UNJF-3A

    SAE Technical Papers | 2022
    Schlagwörter: Imaging and visualization

    BOLT, MACHINE, HEXAGON HEAD, DRILLED, 6 HOLE, PD SHANK, LOW ALLOY STEEL UNS G87400, CADMIUM PLATED, .2500-28 UNJF-3A

    SAE Technical Papers | 2021
    Schlagwörter: Imaging and visualization

    BOLT, TEE HEAD - CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, CHAMFERED, .3750-24 UNJF-3A

    SAE Technical Papers | 2021
    Schlagwörter: Imaging and visualization

    BOLT, TEE HEAD - CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, CHAMFERED, .3125-24 UNJF-3A

    SAE Technical Papers | 2022
    Schlagwörter: Imaging and visualization

    BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .1900-32 UNJF-3A

    SAE Technical Papers | 2023
    Schlagwörter: Imaging and visualization

    Geometric Derivation of Camera Equations

    Funk, James | SAE Technical Papers | 2022
    Schlagwörter: Imaging and visualization

    BOLT, TEE HEAD - CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, CHAMFERED, .4375-20 UNJF-3A

    SAE Technical Papers | 2021
    Schlagwörter: Imaging and visualization

    SCREW, MACHINE - STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .1380-40 UNJF-3A

    SAE Technical Papers | 2021
    Schlagwörter: Imaging and visualization

    SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE HEXAGON HEAD, .1640-36 UNJF-3A

    SAE Technical Papers | 2022
    Schlagwörter: Imaging and visualization

    Development of a Transmission-Illumination-Based Crack Detection Method Using Translucent Tools for Testing of Thin-Walled Metal Sheets and Foils

    Staupendahl, Daniel / Schneider, Jan-Luca / Wahlers, Ludger | SAE Technical Papers | 2022
    Schlagwörter: Imaging and visualization

    BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, TI 6Al-4V (UNS R56400), .2500-28 UNJF-3A

    SAE Technical Papers | 2021
    Schlagwörter: Imaging and visualization

    BOLT, MACHINE - SPLINE DRIVE EXTENDED WASHER, FULL SHANK, LONG THREAD, AMS5662, METRIC

    SAE Technical Papers | 2021
    Schlagwörter: Imaging and visualization

Ergebnisse anzeigen
10 20

Suchergebnisse filtern