1–20 von 80 Ergebnissen
|

    A condensed dynamic model of a heavy-duty truck for optimization of the powertrain mounting system considering the chassis frame flexibility

    Tan, Bohuan / Chen, Yuanchang / Liao, Quanfu et al. | SAGE Publications | 2020
    of the chassis frame. To overcome this disadvantage, a new full vehicle model is proposed which embraces the view of system modeling and ...
    Schlagwörter: powertrain mounting system , optimization

    A data-driven model-based shared control strategy considering drivers’ adaptive behavior in driver-automation interaction

    Guo, Wenfeng / Cao, Haotian / Zhao, Song et al. | SAGE Publications | 2023
    the Koopman operator theory can be exploited for modeling the dynamics of the driver-vehicle integrated system, and the drivers’ adaptive ...
    Schlagwörter: driver behavior modeling

    A diesel engine air path model with a WG and an ETV for exhaust temperature controller design and embedded control

    Thiel, Michael / Tibken, Bernd | SAGE Publications | 2022
    (ETV) is presented. The model is designed with regard to system analysis, controller design, and real-time feasibility. That means, care is ...

    Aerodynamic interaction of turbines in a regulated two-stage turbocharging system

    Yang, Mingyang / Pan, Lei / Shu, Mengying et al. | SAGE Publications | 2022
    performance in a two-stage turbocharging system, which can be used for the modeling and optimization of multi-stage turbocharging systems. ...

    A fast dynamic model of a two-sided permanent magnet electrodynamic suspension system in a maglev train

    Wang, Bo / Luo, Shihui / Ma, Weihua et al. | SAGE Publications | 2023
    scalar form, and a dynamics model of the two-sided PM EDS maglev system was finished by the theory of multi-body dynamics modeling; finally, the ...
    Schlagwörter: Electrodynamic suspension system , dynamics modeling

    A general parametric finite element modeling and stress response analysis methods for pipeline system using the nonconforming solid element

    Ji, Wenhao / Sun, Wei / Ma, Hongwei et al. | SAGE Publications | 2024

    In the dynamic topology optimization design of pipeline system, parametric finite element modeling (PFEM) is needed to improve the model

     ...
    Schlagwörter: parametric finite element modeling , pipeline system

    A genetic algorithm-based model predictive control autopilot design and its implementation in an autonomous underwater vehicle

    Naeem, W / Sutton, R / Chudley, J et al. | SAGE Publications | 2004
    ' knowledge, this is the first successful application of a GA in realtime optimization for controller tuning in the marine sector and thus the paper ...
    Schlagwörter: system identification

    A hybrid optimization strategy for the maintenance of the wheels of metro vehicles: Vehicle turning, wheel re-profiling, and multi-template use

    Zhu, Wei / Yang, Di / Huang, Jun | SAGE Publications | 2018
    modeling and maintenance optimization of the wheels play significant roles with regard to both safety and cost. However, it is difficult to provide ...
    Schlagwörter: optimization

    A modelling and simulation framework for the integrated design of aircraft systems

    Cimmino, N / Ponnusamy, SS / Garriga, A Garcia et al. | SAGE Publications | 2020
    the design process. Under the Clean Sky 2 initiative, the ModellIng and Simulation tools for Systems IntegratiON on Aircraft (MISSION) project ...
    Schlagwörter: aircraft-system integration , multidisciplinary design optimization , modelling and simulation , model based system engineering

    Analysis of a 50 kWe indirect methanol proton exchange membrane fuel cell (PEMFC) system for transportation application

    Virji, M B V / Thring, R H | SAGE Publications | 2005
    the reformer as a function of steam-carbon ratio and reformer temperature. A degree of optimization of the system was conducted by (a) the ...
    Schlagwörter: electrical system efficiency , modelling and simulation , PEMFC system , hybrid vehicle system , SPFC system

    An evolutionary optimizing approach to neural network architecture for improving identification and modeling of aircraft nonlinear dynamics

    Roudbari, Alireza / Saghafi, Fariborz | SAGE Publications | 2014
    and modeling of aircraft nonlinear dynamics. Weighted connections, network architecture, and learning rules are features that play important ...
    Schlagwörter: system identification , optimization algorithm

    A new modelling procedure of the engine room ventilation system for work risk prevention and energy saving

    Orosa, José A / Costa, Ángel M / Pérez, José A | SAGE Publications | 2017
    , which represents about 5% of the nominal power of a modern ship. Nevertheless, its energetic optimization is not simple and must consider also ...
    Schlagwörter: computational fluid dynamics thermal modelling

    A proportional derivative sliding mode control for an overactuated quadcopter

    Alkamachi, Ahmed / Erçelebi, Ergun | SAGE Publications | 2019
    used to proof the system and controller capability in following complex trajectories. Finally, the proposed controller robustness and ...

    A surrogate-based integrated framework for the aerodynamic design optimization of a subsonic wing planform shape

    Benaouali, Abdelkader / Kachel, Stanisław | SAGE Publications | 2018
    involves SIEMENS NX, ICEM CFD and FLUENT respectively. The optimization is made feasible using surrogate modeling techniques combined with a ...
    Schlagwörter: Aerodynamic shape optimization

    Calculation of the performance of resonant wave energy converters in real seas

    Yavuz, H / McCabe, A / Aggidis, G et al. | SAGE Publications | 2006
    adjust the power take-off system settings to maintain quasiresonance and, hence, approach the level of performance in a comparable regular sea ...
    Schlagwörter: power optimization

    Combined active flow and flight control systems design for morphing unmanned aerial vehicles

    Kanat, Öztürk Özdemir / Karatay, Ertuğrul / Köse, Oğuz et al. | SAGE Publications | 2019
    In this article, combined active flow control system and flight control system design for morphing unmanned aerial vehicles is applied for ...
    Schlagwörter: closed-loop system , control system

    Computer aided engineering in diesel exhaust aftertreatment systems design

    Stamatelos, A. M. / Koltsakis, G. C. / Kandylas, I. P. et al. | SAGE Publications | 1999
    computational tools: a computer code for modelling transient exhaust system heat transfer, a computer code for modelling the transient operation of a ...
    Schlagwörter: mathematical modelling , optimization

    Conceptual interplanetary space mission design using multi-objective evolutionary optimization and design grammars

    Weber, A / Fasoulas, S / Wolf, K | SAGE Publications | 2011
    provide a flexible modular modelling architecture. The model is generated by a compiler based on predefined components and rules. The rules ...
    Schlagwörter: conceptual design optimization , multi-objective optimization

    Design and optimization of bump (compression surface) for diverterless supersonic inlet

    Arif, Irsalan / Iftikhar, Hassan / Javed, Ali | SAGE Publications | 2022
    . Surrogate modeling is carried out by the least square regression method to identify the fitness function, and optimization is performed using ...

    Design, modeling, and research on vertical performance of a drive system with in-wheel motor as dynamic vibration absorber

    Zhao, Pingping / Fan, Zhimin | SAGE Publications | 2023
    can effectively suppress the peak vibration response and improve the vehicle vertical performance. The influence of system parameters of the ...