1–20 von 32 Ergebnissen
|

    Facing high thermal loads on power modules in Hybrid Electrical Vehicles

    Christmann, Andre / Mainka, Krzysztof | Tema Archiv | 2010
    Hybrid Electrical Vehicles with high power semiconductor modules integrated in the vehicles lead to the application of IEC standard also to power ...
    Schlagwörter: Hochleistung

    Designing and manufacturing vehicles with advanced high-strength steels

    Krupitzer, Ronald P. / Urban, Dennis M. / Witmer, Dennis A. | Tema Archiv | 2004
    described together with the associated development of AHSS (Advanced High-Strength Steels) on which these technologies depend. Additionally, results ...
    Schlagwörter: AHSS (Advanced High Strength Steel)

    Nonlinear filtering for a nonlinear vision-based system for the relative tracking of two marine vehicles

    Chareyron, Sophie / Athans, Michael | Tema Archiv | 2003
    to significant accuracy improvements. The performance of the extended Kalman filter even for a high initial state uncertainty or high plant ...

    Installation and evaluation of RFID readers on moving vehicles

    Lee, Eun-Kyu / Yoo, Young Min / Park, Chan Gook et al. | Tema Archiv | 2009
    because of the high speed of vehicles. This is particularly true when the RFID reader is on the moving vehicle. In this paper, the authors ...

    AVL Coup-e 800: A high-performance electric vehicle with 1200 V IGBT technology

    Engstle, A. / Deiml, M. / Angermaier, A. et al. | Tema Archiv | 2013
    The AVL Coup-e 800 features an electric high performance powertrain with 800 volt powernet, which was built into the vehicle platform of a ...
    Schlagwörter: Plattform (Fahrzeug)

    Future generation vehicles and the potential impact on lead-acid batteries

    Cooper, Allan / Moseley, Patrick | Tema Archiv | 2005
    sulfate on the negative plate. The ALABC has been carrying out focused program of R&D to investigate ways of achieving this high rate performance ...

    EMI in electric vehicles

    Guttowski, S. / Weber, S. / Hoene, E. et al. | Tema Archiv | 2003
    high-power cables. Treating this new electric drive system or its components as a conventional automotive component in terms of EMI test ...

    Inclusion of mass layers in hybrid acoustics dash insulators: Implications on acoustical performance and part design process

    Seppi, Marco / Bertolini, Claudio | Tema Archiv | 2013
    acoustic packages with high insulation and low absorption performance (typically, spring-mass systems); on the other side, lightweight acoustic ...
    Schlagwörter: Fahrzeug

    Galvanically isolated, bi-directional charger for electric vehicles - analysis and implementation

    Rosekeit, M. / Doncker, R.W. de | Tema Archiv | 2011
    This paper presents a bi-directional power converter for on-board use in Plug-in Hybrid Electric Vehicles and Electric Vehicles based on ...

    Resonant motor drive topology with standard modules for electric vehicles

    Frisch, Michael | Tema Archiv | 2008
    building blocks are compared regarding system performance, efficiency, reliability and cost. A frequency converter has been developed based on the ...

    A new base plate concept on the basis of aluminium-copper clad materials

    Uhlemann, Andre / Herbrandt, Alexander | Tema Archiv | 2012
    Power electronic applications for hybrid as well as for electric vehicles have a tendency to be based on liquid water cooling system in ...
    Schlagwörter: Hochleistung

    A hydrogen fuel cell-high energy dense battery hybrid energy/power source for an urban electric vehicle

    Schofield, N. / Yap, H.T. / Bingham, C.M. | Tema Archiv | 2004
    Electric vehicles are set to play a prominent role in addressing the energy and environmental impact of an increasing road transport ...

    Preliminary investigation on the dynamics of motorcycle fall behavior: Influence of a simple airbag jacket system on rider safety

    Bellati, Alessandro / Cossalter, Vittore / Lot, Roberto et al. | Tema Archiv | 2006
    , motorcyclists are more likely to experience falls due to front slippage, rear slippage or high-side phenomena, especially on tracks. The dynamic ...
    Schlagwörter: Schleudern (Fahrzeug)

    Topology conception of a high-voltage battery charger and a domestic power outlet sharing active elements for an electric/hybrid vehicle

    Ferre, Antoni / Alvarez, Ignacio / Mestre, Jordi et al. | Tema Archiv | 2007
    (selected by the user), and optimising the performance of the whole system due to the reduced losses on the MOSFETs used for the implementation ...

    A study on the fundamental heat transport potential of an in-vehicle magnetic refrigerator

    Tasaki, Y. / Takahashi, H. / Yasuda, Y. et al. | Tema Archiv | 2012
    The power consumption of an air conditioner in an electric vehicle has a considerable impact on the cruising range. A high-performance ...
    Verlag: International Institute of Refrigeration , Paris

    Optimization of a dash "hybrid" insulator-absorber based on pareto analysis of SEA simulation results

    Negro, Elena / Marino, Angela / Boreanaz, Giovanni | Tema Archiv | 2011
    strong pressure to cut weight in vehicles. Unlike conventional insulators, based on the well-known spring-mass principle, these hybrid components ...