Suche

Sie sind hier: Homepage > Suche

Auswahl aufheben

1–50 von 372 Ergebnissen

Treffer gruppieren

WELDING OF AUTOMOTIVE POLYMERIC COMPONENTS USING LASER RADIATION

von Busse, A. / Haferkamp, H. / Goede, M. et al. | SAE Technical Papers | 2001

Weld Failure in Formability Testing of Aluminum Tailor Welded Blanks

Feng, F. / Shakeri, H. R. / Clarke, J. A. et al. | SAE Technical Papers | 2001

Water Injection Effects on NOx Emissions for Engines Utilizing Diffusion Flame Combustion

Mellor, A. M. / Psota, M. A. / Fort, T. H. et al. | SAE Technical Papers | 1997

Waste Collector Operation in STS

Rotter, H. A. / Mangialardi, J. K. / McIntosh, M. E. et al. | SAE Technical Papers | 1982

Vibration Control of an Active Seat Suspension System Integrated Pregnant Woman Body Model

Bassiuny, A. M / Abdel-Ghany, AM / Metered, H. et al. | SAE Technical Papers | 2019

Vertical Flight in an Obstacle-Rich Environment

Kramer, Arthur F. / Sawyer, Brian M. / Bolz, Eric H. et al. | SAE Technical Papers | 1996

Utilization of Solid Waste for Activated Carbon Production in Space

Florczak, Elizabeth H. / Suuberg, Eric M. / Kroo, Erik et al. | SAE Technical Papers | 2003

Utilization of Resources in a Vehicle Service Station with Expert Diagnostic System

Abou-El-Nour, A. M. A. A. / Zaki, E. S. / Zaffan, H. A. et al. | SAE Technical Papers | 2005

Utilization of Advanced Three-Way Catalyst Formulations on Ceramic Ultra Thin Wall Substrates for Future Legislation

Kunz, A. / Vogt, C. D. / Clark, D. et al. | SAE Technical Papers | 2002

Using of Quasi-Two Zone Combustion Model to Predict the Performance of a Dual Fuel Engine

Abd Alla, G. H. / Soliman, H. A. / Abd Rabbo, M. F. et al. | SAE Technical Papers | 2000

Using Advanced Injection Timing and EGR to Improve DI Diesel Engine Efficiency at Acceptable NO and Soot Levels

Raab, A. / Kouremenos, D.A. / Hountalas, D.T. et al. | SAE Technical Papers | 2001

Use of Ethyl-t-Butyl Ether (ETBE) as a Gasoline Blending Component

Shiblom, Clifford M. / Schoonveld, Gary A. / Riley, Richard K. et al. | SAE Technical Papers | 1990

Use of Catalytic Monoliths for On-Road Ozone Destruction

Nichols, Gary E. / Baker, James A. / Sinkevitch, Robert M. et al. | SAE Technical Papers | 1998

Urea-SCR System Demonstration and Evaluation for Heavy-Duty Diesel Trucks

Brodrick, C. J. / Sperling, D. / Dwyer, H. A. et al. | SAE Technical Papers | 1999

Ultra High Bypass Engine Applications to Commercial and Military Aircraft

Ivey, D. M. / Welge, H. R. / Page, M. A. | SAE Technical Papers | 1986

Transverse Interference Pattern for the Examination of Spliced Optical Fibers (In Transmission and at Reflection)

Al-Shukri, A. / Behery, G. M. / El-Ghandoor, H. et al. | SAE Technical Papers | 2001

Toxicologically Acceptable Levels of Methanol and Formaldehyde Emissions from Methanol-Fueled Vehicles

Harvey, Craig A. / Somers, Joseph H. / Carey, Penny M. et al. | SAE Technical Papers | 1984

Toxic Air Pollutant Vehicle Exhaust Emissions with Reformulated Gasolines

Hochhauser, Albert M. / Rippon, Brian H. / Benson, Jack D. et al. | SAE Technical Papers | 1991

Toward A Second Generation Electronic Nose at JPL: Sensing Film Optimization Studies

Manfreda, A. / Zhou, H. / Manatt, K. et al. | SAE Technical Papers | 2001

Torsional Strength of Splined Shafts

HUEBOTTER, H. A. / ZUCROW, M. J. | SAE Technical Papers | 1927

Tool Material Performance During Draw Bead Deformation of Aluminum Sheet

Zonker, H. R. / Teichman, M. M. / Whittle, N. C. et al. | SAE Technical Papers | 1996

Thoracic Trauma Assessment Formulations for Restrained Drivers in Simulated Frontal Impacts

Sances, Anthony / Sharpless, Cheryl L. / Kallieris, Dimitrios et al. | SAE Technical Papers | 1994

The Use of Emulsion, Water Induction and EGR for Controlling Diesel Engine Emissions

Rajakaruna, H / Nazha, M A A / Wagstaff, S A | SAE Technical Papers | 2001

The Use of Dihydroxy Fatty Acid and Palm-Based Polyol as Selected Components of Envo-Diesel Fuel Blends to Reduce C.I. Engine Gaseous Emissions and Carbon Deposits

Masjuki, H. H. / Husnawan, M. / Kalam, M. A. et al. | SAE Technical Papers | 2009

The Study for Structural Design of the Segmented SiC-DPF

Schaefer-Sindlinger, A. / Vogt, C. D. / Kurachi, H. et al. | SAE Technical Papers | 2006

The Role of Surface Finish in Pitting Fatigue of Carburized Steel

Sheehan, J. P. / Howes, M. A. H. | SAE Technical Papers | 1973

The Role of Nitrogen in the Observed Direct Microbial Mutagenic Activity for Diesel Engine Combustion in a Single–Cylinder DI Engine

Yergey, J. A. / Herr, J. D. / Dukovich, M. et al. | SAE Technical Papers | 1982

Thermo-Mechanical Modeling of Friction Stir Spot Welding (FSSW)

Awang, M. / David, S. A. / Mucino, V. H. et al. | SAE Technical Papers | 2006

The Potential of Using Vegetable Oil Fuels and Ethanol as Fuels for Engine Operation at Heights Well Above Sea Level

Duque D., Carlos A. / Galeano U., Carlos H. / Acevedo G., Helmer R. et al. | SAE Technical Papers | 2007

The Potential of Switched Reluctance Motor Technology for Electro-Mechanical Brake Applications

Khalil, A. / Omekanda, A. M. / Lequesne, B. et al. | SAE Technical Papers | 2006

THE NEW LARK VI OVERHEAD VALVE ENGINE

SABO, E. M. / JOHNSON, H. R. / SCHERGER, T. A. | SAE Technical Papers | 1961

The Long-Term Durability of Thermoplastic Bumpers

Golovoy, A. / Bauer, D. R. / Zinbo, M. et al. | SAE Technical Papers | 1993

The KA24E Engine Test for ILSAC GF-3 Part 1: Engine Design, Operating Conditions and Wear Mechanisms

Clough, A. E. / Eldredge-LaMarca, C. E. / Hanna, M. E. et al. | SAE Technical Papers | 1998

The Influence of Calcium Treatment on the Mechanical Properties of Plain Carbon (SAE 1050) Steel

Christ, A. H. / Cabadas, E. J. / Tatteff, K. N. et al. | SAE Technical Papers | 1994

The Influence of an On Line Oil Recycler on Oil Quality with Oil Age from a Low Emission DI Diesel Engine

Rahman, A. A. / Andrews, Gordon E. / Hall, J. et al. | SAE Technical Papers | 2003

The Influence of an On Line Oil Recycler on Oil Quality from a Bus in Service Using Synthetic Oil

Rahman, A. A. / Andrews, Gordon E. / Hall, J. et al. | SAE Technical Papers | 2001

The Influence of an Oil Recycler on Lubricating Oil Quality with Oil Age for a Bus Using in Service Testing

Rahman, A. A. / Andrews, Gordon E. / Li, Hu et al. | SAE Technical Papers | 2000

The Flywheel Battery Containment Problem

Beno, J. H. / Kramer, J. M. / Pichot, M. A. et al. | SAE Technical Papers | 1997

The First Standard Automotive Crash Dummy

Starkey, J. A. / Young, J. W. / Auerbach, Julie H. et al. | SAE Technical Papers | 1969

The Effects of Retained Fluid and Humidity on the Evacuation of Critical Vehicle Systems

Pourmovahed, A. / Shkokani, A. / Dostinov, D. et al. | SAE Technical Papers | 1999

The Effects of Methanol/Gasoline Blends on Automobile Emissions

Hochhauser, Albert M. / Rippon, Brian H. / Benson, Jack D. et al. | SAE Technical Papers | 1992

The Effects of Diluent Admissions and Intake Temperature in Exhaust Gas Recirculation on the Emissions of an Indirect-Injection Dual Fuel Engine

Abd-Alla, G. H. / Soliman, H. A. / Abd-Rabbo, M. F. | SAE Technical Papers | 2000

The Effect of Valve Overlap on Idle Operation: Comparison of Model and Experiment

Newnan, C. E. / Davis, G. C. / Cikanek, H. A. et al. | SAE Technical Papers | 1993

The Effect of Oil Drain Interval on Valvetrain Friction and Wear

Gangopadhyay, A. K. / Phillips, C. B. / Uy, D. et al. | SAE Technical Papers | 2007

The Effect of Injector and Intake Port Design on In-Cylinder Fuel Droplet Distribution, Airflow and Lean Burn Performance for a Honda VTEC-E Engine

Taylor, A. M. K. P. / Whitelaw, J. H. / Yoshida, Kazuo et al. | SAE Technical Papers | 1996

The Effect of Gear Lubricant on Fuel Economy as Measured in a Line Haul Truck Fleet

Adams, J. H. / Frost, K. A. / Painter, L. J. et al. | SAE Technical Papers | 1981

The Effect of Composition and Microstructure on the Pitting Fatigue of Carburized Steel Cases

Sheehan, J. P. / Howes, M. A. H. | SAE Technical Papers | 1974

The Effect of Case Carbon Content and Heat Treatment on the Pitting Fatigue of 8620 Steel

Sheehan, J. P. / Howes, M. A. H. | SAE Technical Papers | 1972

The Effect of Aromatics, MTBE, Olefins and T90 on Mass Exhaust Emissions from Current and Older Vehicles - The Auto/Oil Air Quality Improvement Research Program

Hochhauser, Albert M. / Rippon, Brian H. / Benson, Jack D. et al. | SAE Technical Papers | 1991

The Diesel Exhaust Aftertreatment (DEXA) Cluster: A Systematic Approach to Diesel Particulate Emission Control in Europe

D'Alessio, A. / D'Anna, A. / Wollmann, A. et al. | SAE Technical Papers | 2004

Erscheinungsjahr

Medientyp

Datenquelle

Autor

Fach

Format

Lizenz

Sprache