1–20 von 22 Ergebnissen
|

    The occurrence of defects in welded joints

    Kountouris, I.S. / Baker, M.J. | Tema Archiv | 1990
    Bauteil, eine Zellenstruktur, und seine ZfP-Geschichte. Geprüft wurde auf oberflächenoffene Fehler mit Magnetpulver gemäß ASME V mit Wechselstrom ...

    Numerical reproduction of extreme wave loads on a gravity wind turbine foundation

    Bredmose, H. / Skourup, J. / Hansen, E.A. et al. | Tema Archiv | 2006
    loads can be computed by a Navier-Stokes solver combined with the VOF technique. The computations presented took about 16 hours each on a ...
    Verlag: American Society of Mechanical Engineers (ASME) , New York
    Schlagwörter: Offshore-Plattform , Welle (Meer)

    The VIVACE converter: Model tests at high damping and reynolds number around 105

    Bernitsas, Michael M. / Ben-Simon, Y. / Raghavan, Kamaldev et al. | Tema Archiv | 2006
    other water resources. The underlying concepts for design, scaling, and operation of VIVACE (Vortex Induced Vibrations Aquatic Clean Energy ...
    Verlag: American Society of Mechanical Engineers (ASME) , New York
    Schlagwörter: Ozean

    Wave spectral bandwidth as a measure of available wave power

    Smith, George H. / Venugopal, Vengatesan / Fasham, Jack | Tema Archiv | 2006
    properties of the sea. This paper examines the effect of two generic power transfer functions (PTF) on power production from six simulated wave ...
    Verlag: American Society of Mechanical Engineers (ASME) , New York
    Schlagwörter: Welle (Meer)

    Development of floating system for recovery of lithium from seawater

    Zhou, Guoqiang / Yao, Xiongliang / Sun, Liping | Tema Archiv | 2006
    Recovery of Lithium from Seawater', was carried out sponsored by Japanese Ship and Ocean Foundation. The project was divided into two stages ...
    Verlag: American Society of Mechanical Engineers (ASME) , New York

    Hydrodynamic and Thruster Model Validation for Autonomous Underwater Vehicles

    Chyba, M. / Smith, R. N. / Choi, S. K. et al. | British Library Conference Proceedings | 2007
    Verlag: American Society of Mechanical Engineers , New York
    Schlagwörter: Offshore mechanics , Arctic engineering , ASME

    Correlation between hydrolysis and the ultimate mechanical properties of polyamides in offshore conditions

    Hochstetter, Gilles / Dang, Patrick | Tema Archiv | 2009
    30 years in the field of oil and gas applications, the decrease of its mechanical properties due to hydrolysis can be monitored by the ...
    Verlag: American Society of Mechanical Engineers (ASME) , New York
    Schlagwörter: Offshore-Gebiet , Offshore-Einsatz

    Effects of girth weld on the local buckling response of conventional grade pipelines

    Barrett, John / Kenny, Shawn / Phillips, Ryan | Tema Archiv | 2009
    pipelines in ice environments. Numerical finite element modelling procedures have been developed to assess the bending moment and strain capacity of ...
    Verlag: American Society of Mechanical Engineers (ASME) , New York

    Influence of a varying vertical velocity profile on turbine efficiency for a vertical axis marine current turbine

    Goude, Anders / Lalander, Emilia / Leijon, Mats | Tema Archiv | 2009
    profile, and on the shape of the velocity profile, where a linear profile causes a lower Cp compared to a logarithmic profile. The ...
    Verlag: American Society of Mechanical Engineers (ASME) , New York

    Evaluation of shear area of dwtt fracture surface with instrumented system

    Ahn, Seong Soo / Ham, You Sun | Tema Archiv | 2009
    with static loading, the data of load and displacement should be gathered during test because they were driven from fracture mechanics. In case ...
    Verlag: American Society of Mechanical Engineers (ASME) , New York

    Extra high-pressure high-temperature (XHPHT) flowlines - design considerations and challenges

    Jukes, Paul / Eltaher, Ayman / Sun, Jason et al. | Tema Archiv | 2009
    includes the testing of centralizers, waterstop seals, thermal insulation and loadshares. This paper is based on both theoretical and practical ...
    Verlag: American Society of Mechanical Engineers (ASME) , New York
    Schlagwörter: USA (United States of America)

    Finite element analysis of strain concentration in field joint of concrete coated pipelines

    Nourpanah, Nikzad / Taheri, Farid | Tema Archiv | 2009
    Realistic and accurate modeling of the strains developed in concrete coated pipelines is an important objective to offshore pipeline ...
    Verlag: American Society of Mechanical Engineers (ASME) , New York

    Preliminary investigation of power output of two typical two-turbine tidal current systems

    Li, Ye / Calisal, Sander M. | Tema Archiv | 2009
    The hydrodynamic interaction between a stand-alone tidal current turbine and the incoming flow through it affects the power output of the ...
    Verlag: American Society of Mechanical Engineers (ASME) , New York

    Comparison of design criteria for externally pressurised vessels

    Kahlen, Franz-Josef / Curry, Richard | Tema Archiv | 2009
    investigate the modes of failure and to improve the design. The buckling modes are analyzed by means of an eigenvalue investigation on each model ...
    Verlag: American Society of Mechanical Engineers (ASME) , New York

    A design study of marine current turbine-generator combinations

    Lundin, Staffan / Grabbe, Marten / Yuen, Katarina et al. | Tema Archiv | 2009
    Marine currents are an offshore source of renewable energy of increasing importance, with the development of technology for electricity ...
    Verlag: American Society of Mechanical Engineers (ASME) , New York

    An approach to include observed viv likelihood in drilling riser fatigue analyses

    Tognarelli, Michael A. / Gabbai, Rene D. / Campbell, Mike | Tema Archiv | 2009
    computer predictions based on the observed current profile, a relationship is developed between the intensity of the fatigue damage predicted and ...
    Verlag: American Society of Mechanical Engineers (ASME) , New York

    Validation of Bulbous Bow Optimisation by Viscous CFD

    Vroegrijk, Erik / Whitworth, Stewart / Caldas, Alejandro | British Library Conference Proceedings | 2015
    Verlag: ASME

    OMAE2016-54259 Computational Fluid Dynamics Study of a Flexible Flapping Hydrofoil Propulsor

    Vijayakumaran, Harikrishnan / Krishnankutty, Parameswaran | British Library Conference Proceedings | 2016
    Verlag: ASME

    OMAE2017-61149 A Study on Forced Vibration of Double Bottom Structure due to Whipping on an Ultra Large Container Ship

    Kawasaki, Yohei / Okada, Tetsuo / Kobayakawa, Hiroaki et al. | British Library Conference Proceedings | 2017
    Verlag: ASME

    RANS Study on Hydrodynamic Characteristics of Flapped Rudders

    Liu, Jialun / Hekkenberg, Robert / Zhao, Bingqian | British Library Conference Proceedings | 2018
    Verlag: ASME