search-head

Sie sind hier: Homepage >  Suche

Kraftfahrwesen   Physik   Ggf. lizenzpflichtig   Auswahl aufheben
1–50 von 91 Ergebnissen
|
Sortieren:

    Vibration and shape control of a ribbed plate by means of discrete piezoactuators - experimental and numerical results

    Enzmann,M. / Linz,C. / Markworth,M. et al. | Kraftfahrwesen | 1999

    Validierung eines adaptiven Tilgers an einer Produktionsmaschine mit den Methoden der operationellen Modalanalyse

    Schmidt,M. / Atzrodt,H. / Sabirin,C. et al. | Kraftfahrwesen | 2011

    Validation of Eulerian spray concept coupled with CFD combustion analysis

    Suzzi,D. / Krueger,C. / Blessing,M. et al. | Kraftfahrwesen | 2007

    Using experimental modal analysis to simulate structural dynamic modifications

    Braccesi,C. / Carfagni,M. / Univ.Florenz,IT | Kraftfahrwesen | 1988

    Use of laser doppler Anemometry to predict the defrost/demist performance over the windshield and side windows of a vehicle

    Swales,C. / Crompton,M. / Cucuz,M. et al. | Kraftfahrwesen | 2003

    Ultra-thin multilayer circuits

    Saari,M. / Anderson,D. / Myers,C. et al. | Kraftfahrwesen | 1994

    Treatment of constrained multibody dynamic systems with uncertainties

    Sandu,C. / Sandu,A. / Chan,B.J. et al. | Kraftfahrwesen | 2005

    Thermomanagement von Hochleistungs LI Ionen Batterien

    Stripf,M. / Wehowski,M. / Schmid,C. et al. | Kraftfahrwesen | 2012

    Thermoelektrische Waermepumpe fuer Lithium Ionen Batterien

    Wehowski,M. / Gruenwald,J. / Heneka,C. et al. | Kraftfahrwesen | 2013

    Thermodynamik des BMW Dreizylindermotors

    Reulein,C. / Schuenemann,E. / Schwarz,C. et al. | Kraftfahrwesen | 2013

    The DirectStart: Investigation of mixture formation by means of optical measurements and 3D-CFD-simulation

    Zuelch,C. / Kulzer,A. / Chiodi,M. et al. | Kraftfahrwesen | 2005

    The aerodynamic drag of a small SUV as measured on-road and in the wind tunnel

    Sherwin,C. / Howell,J. / Passmore,M. et al. | Kraftfahrwesen | 2001

    Tests: Citroen Berlingo Multispace HDI, Mitsubishi Space Star 1,9 DI-D Avance

    Strubreiter,M. / Houdek,C. / Platzer,D. et al. | Kraftfahrwesen | 2001

    Structural variable models for simulating the vehicle dynamics at low velocities

    Schuster,C. / Lange,O. / Hiller,M. et al. | Kraftfahrwesen | 1999

    Structural control and characterisation of advanced composite laminates by acoustic emission

    Caneva,C. / Marchetti,M. / Bonora,N. et al. | Kraftfahrwesen | 1991

    Stress measurements in glass using the method of thermal gratings

    Cannon,B.D. / Shepard,C. / Khaleel,M. et al. | Kraftfahrwesen | 2002

    Simulation des Beulverhaltens von Automobilaussenblechen

    Angrosch,B. / Zigo,M. / Goegele,C. et al. | Kraftfahrwesen | 2016

    Self-heated element, solid state, flow sensors

    Canali,C. / Catellani,A. / Morten,B. et al. | Kraftfahrwesen | 1981

    Seated human body behavior under random vibration

    Lukic,J. / Demic,M. / Spentzas,C. et al. | Kraftfahrwesen | 2002

    Schwingungskomfort der Karosserie

    Arzul,C. / Cakmak,M. / Hoppe,A. et al. | Kraftfahrwesen | 2007

    Schwingfestigkeit von Aluminium Druckgussbauteilen unter Beruecksichtigung der fertigungsprozessbedingten Werkstoffinhomogenitaeten

    Fagschlunger,C. / Poetter,K. / Brune,M. et al. | Kraftfahrwesen | 2004

    Research activity performed by Fiat on vehicle susceptibility to electromagnetic fields

    Fermi,U. / Raviglione,C. / Puccini,M. et al. | Kraftfahrwesen | 1990

    Reibungsarme und verschleissfeste Aluminium Silizium Zylinderlaufflaechen

    Rehl,A. / Klimesch,C. / Scherge,M. et al. | Kraftfahrwesen | 2013

    Quasidimensionales Ladungsbewegungsmodell und Turbulenzmodell fuer die Motorprozessrechnung

    Bossung,C. / Grill,M. / Bargende,M. et al. | Kraftfahrwesen | 2014

    Propane, butane and isobutane as automotive climate system working fluids

    Cerri,G. / Salvini,C. / Palazzetti,M. et al. | Kraftfahrwesen | 1995

    Optimierung von thermomechanisch beanspruchten Bauteilen

    Friedrich,M. / Biel,J. / Bangert,C. et al. | Kraftfahrwesen | 2012

    Optimierung von schwingungs- und geraeuschrelevanten Komfortgroessen in der Fahrzeugentwicklung

    Stockmar,J. / Fankhauser,C. / Moshammer,T. et al. | Kraftfahrwesen | 2001

    Numerical modelling of multiphase flow-induced noise and vibration on a poppet valve

    Li,C. / Lien,F.S. / Yee,E. et al. | Kraftfahrwesen | 2015

    Neue Eigenschaften fuer Oberflaechen mit Ionen : Oberflaechenveredelung mit Plasma Ionen

    Kuhn,M. / Hammerl,C. / AxynTeC Duennschichttechnik,Augsburg,DE | Kraftfahrwesen | 2006

    Moeglichkeiten zur Oberflaechenbearbeitung von Elastomeren mittels Plasmatechnik

    Vissing,K. / Paulkowski,D. / Doelle,C. et al. | Kraftfahrwesen | 2013

    Modelling of a solenoid fuel injector:a new approach

    Passarini,.C. / Pinotti,M. / Univ.di Sao Paulo,BR | Kraftfahrwesen | 1993

    Mitsubishi Space Star 1,8 GDI - L'esprit de synthese

    Chevalier,M. / Martin,C. / Mitsubishi Motor,JP | Kraftfahrwesen | 2000

    Microstructure and mechanical properties of sintered reaction bonded silicon nitride ( SRBSN )

    Herrmann,M. / Kessler,S. / Taut,C. et al. | Kraftfahrwesen | 1991

    Measurement if unsteady flow fields

    Raffel,M. / Willert,C. / Kompenhans,J. et al. | Kraftfahrwesen | 2004

    Macroscopic modeling of the non-linear electro-mechanical coupling on ferroelectrics

    Kamlah,M. / Boehle,U. / Munz,D. et al. | Kraftfahrwesen | 1999

    Laserlicht im BMW i8 - Ansteuerung und E/E Integration

    Werkstetter,M. / Weber,S. / Hirth,F. et al. | Kraftfahrwesen | 2014

    Laser-generated surface skimming longitudinal wave measurement of residual stress in shot peened samples

    Besond,C. / Levesque,D. / Lord,M. et al. | Kraftfahrwesen | 2006

    Iron-resin composite materials for soft magnetic applications

    Battison,M. / Barrows,D. / Gelinas,C. et al. | Kraftfahrwesen | 1996

    Investigations of automotive defroster and windshield flow

    Becker,S. / Lienhart,H. / Stoots,C. et al. | Kraftfahrwesen | 2001

    Investigation of the strain behavior of laser-beam and high-frequency-welded seams of tailored blanks using electronic speckle interferometry

    Draugelates,U. / Schram,A. / Hillebrecht,M. et al. | Kraftfahrwesen | 1998

    Investigation of cavitation in a vertical multi-hole injector

    Arcoumanis,C. / Flora,H. / Gavaises,M. et al. | Kraftfahrwesen | 1999

    In-cylinder NO-LIF imaging in a realistic GDI engine using KrF Excimer laser excitation

    Hildenbrand,F. / Schulz,C. / Hartmann,M. et al. | Kraftfahrwesen | 1999

    Inclusion of mass layers in hybrid acoustic dash insulators: implications on acoustical performance and part design process

    Seppi,M. / Bertolini,C. / Autoneum,CH | Kraftfahrwesen | 2013

    Improving 1D simulations of thermal management systems with embedded 3D CFD

    Janssen,C. / Effenberger,M. / Gneiting,R. et al. | Kraftfahrwesen | 2015

    Important modifications of structures and properties of WC-Ti-Co alloys through (Ta,Nb)C additions

    Vasile,T.M / Vasilescu,M. / Patic,C. et al. | Kraftfahrwesen | 2002

    Hybrid substructuring for vibro-acoustical optimization: application to suspension - car body interaction

    Wyckaert,K. / Brughmans,M. / Zhang,C. et al. | Kraftfahrwesen | 1997

    Highway Tractor Trailer Dynamic Response to Nuclear Overpressure

    Engelhardt,C. / Baker,M. / SDRC,US | Kraftfahrwesen | 1984

    High precision collimator lenses made of polycarbonate

    Klinkenberg,C. / Doebler,M. / Zoellner,O. et al. | Kraftfahrwesen | 2012

    Highly accurate characterization of engineering surfaces using a micromirror based confocal microscopy

    Tiftikci,K.A. / Jansen,M. / Morel,M. et al. | Kraftfahrwesen | 2004

    Further studies of cavitation and atomization in diesel engines

    Soteriou,C. / Andrews,R. / Smith,M. et al. | Kraftfahrwesen | 1999

Ergebnisse anzeigen
10 20

Suchergebnisse filtern