Operating safety of adjacent pre-constructed pipeline must be insured when the crude oil and refined oil pipeline is under construction. Applying finite element method, the peak velocities of observed points located at test segment and operating segment of West to East Gas Transmission Pipeline were calculated, and the ratio of the two peak velocities in different relative positions was also obtained. Taking advantage of quantitative relationship between the detonation charge and vibration velocity of particle on the pipeline, the ratio of detonation charge is derived from the peak velocity ratio, thereby the blasting scheme of West to East Gas Transmission Pipeline with different thickness is ascertained. This method is not only economical and convenient, but also has no damage to the pipeline, which also works for other blast schemes of different conditions.
Design of Blasting Scheme Based on Numerical Simulation
CEABM, International Conference on Civil Engineering, Architecture and Building Materials, 3 ; 1364-1369
Applied Mechanics and Materials ; 353-356
2013
6 Seiten
Aufsatz (Konferenz)
Englisch
Numerical Simulation of Shock Wave Caused by Underwater Blasting
Tema Archiv | 2012
|BLASTING DESIGN DEVICE, BLASTING SYSTEM AND OPERATION METHOD OF SAME
Europäisches Patentamt | 2024
|BLASTING DESIGN DEVICE BLASTING SYSTEM AND OPERATION METHOD OF THE SAME
Europäisches Patentamt | 2023
BLASTING DESIGN DEVICE BLASTING SYSTEM AND OPERATION METHOD OF THE SAME
Europäisches Patentamt | 2022
|