A 3.4 kW, 42 V permanent magnet alternator based high power system was built and tested in the Delphi R&D laboratory. It is belt driven system with 3.37 : 1 pully ratio. The size of the alternator is slightly less than the production CS-144 Lundell machine with 1/3 less inertia. For cost reasons, the controller uses a single SCR bridge rectifier. The prototype, which is capable of producing 34A/80A at idle/cruising speed, has been tested in the laboratory yielding 84.5%/70.7 efficiencies. Up to cruising speed, the system shows an improvement in full load efficiencies of 5-6 percentile points over a similiar 14 V permanent magnet machine with dual SCR bridge. This efficiency improvement is due to the reduction in the converter losses as the current is reduced to one third of its 14 V values even with the same copper losses in both machines. However,beyondcruising speed the 14 V permanent magnet generator has better efficiency due to its dual brigde/dual winding configuration. This permits the windings to be switched to a lower number of turns, thus reducing copper losses (for a given load current).
A 3.4 kW, 42 V high efficiency automotive power generation system
Ein 3,4 kW, 42 V - Hochleistungsstromerzeugungssystem für Kraftfahrzeuge
2000
15 Seiten, 18 Bilder, 15 Quellen
Aufsatz (Konferenz)
Englisch
A 3,4 kW, 42 V high efficiency automotive power generation system
Kraftfahrwesen | 2000
|A 3.4 kW, 42 V High Efficiency Automotive Power Generation System
SAE Technical Papers | 2000
|2000-01-3064 A 3.4 kW, 42 V High Efficiency Automotive Power Generation System
British Library Conference Proceedings | 2000
|Automotive power generation and control
TIBKAT | 2000
|High efficiency automotive power supply with hysteretic current mode controller
Tema Archiv | 1996
|