Abstract Since material surfaces on the outside of spacecraft are exposed directly to the space environment, material having high tolerance to atomic oxygen, ultraviolet rays and radiation are preferred for long time spacecraft operation. In order to examine the influence of atomic oxygen (AO) on space grade materials, an atomic oxygen simulation chamber was developed. A system was developed that generates AO using a laser detonation method. A CO2 gas laser (5 J) irradiates the oxygen gas in a vacuum chamber (2 MPa) to dissociate the molecular oxygen into atomic. The velocity of AO can be controlled based on the timing between the laser and the gas pulse valve that injects oxygen gas into the chamber. The AO velocity generated by this system is measured using a QMASS (Quadruple Mass Spectrometer) and found to be 8 km/s. It was necessary to measure the AO flux distribution in the chamber at the location where the material samples are exposed to AO. The AO flux distribution was evaluated by measuring the mass gain on a QCM (QuartzCrystal Microbalance) coated with a silver film upon exposure to the AO.
Measurement of Atomic-Oxygen Flux Distribution
2013
2012-06-04
9 pages
Aufsatz/Kapitel (Buch)
Elektronische Ressource
Englisch
High-Flux Atomic-Oxygen Source
NTRS | 1986
|D-Region Atomic Oxygen Measurement
NTIS | 1971
|In situ measurement of atomic oxygen flux using silver film sensor onboard “TianTuo 1” nanosatellite
Online Contents | 2015
|