Short-pitch corrugation formation on resilient fastener metro tracks explained using rail-bending vibrations within the bogie wheelbase

Sie sind hier: Homepage > Suche

Short-pitch corrugation formation on resilient fastener metro tracks explained using rail-bending vibrations within the bogie wheelbase

Spiryagin, Maksym / Stichel, Sebastian / Bruni, Stefano / Ren, Dexiang / Tao, Gongquan / Li, Wei / Wen, Zefeng

Short-pitch corrugation is a serious problem on resilient fastened railway track for many metro lines, causing severe noise and vibration that shortens the life of the vehicle and track components. To address this problem, the formation mechanism of this kind of corrugation is investigated in this study. The corrugation characteristics and natural frequency of the resilient fastener track are determined by field investigations. Then, ‘frequency sweeping’ and long-term rail-roughness prediction models are developed to reveal the crucial role of the interactions between two wheelsets in the corrugation formation and to estimate the effects of speed variations and bogie wheelbase on corrugation growth. The spectral analysis results indicate that the spatial frequency spectrum exhibits several peaks at equal intervals due to the short-pitch corrugation of a resilient fastener metro track, which are related to the third-order rail-bending vibration within the bogie wheelbase at about 775 Hz. In addition, large and small speed variations affect the wavelength and depth growth of the corrugation, respectively. The growth of corrugation depth is amplified when the resonance frequency associated with the corrugation formation is an integer-multiple of the wheel-passing frequency. The wheelbase is also an important factor in determining the corrugation wavelength because of its influence on the resonance frequency.

Zugriff

Zugriff prüfen

Verfügbarkeit in meiner Bibliothek prüfen

Bestellung bei Subito €

Exportieren, teilen und zitieren

Dokumentinformationen

Titel :

Short-pitch corrugation formation on resilient fastener metro tracks explained using rail-bending vibrations within the bogie wheelbase

Beteiligte:

Spiryagin, Maksym (Autor:in) / Stichel, Sebastian (Autor:in) / Bruni, Stefano (Autor:in) / Ren, Dexiang (Autor:in) / Tao, Gongquan (Autor:in) / Li, Wei (Autor:in) / Wen, Zefeng (Autor:in)

Erschienen in:

Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit ; 238 , 4 ; 449-460

Erscheinungsdatum :

2024-04-01

ISSN :

0954-4097 , 2041-3017

DOI :

https://doi.org/10.1177/09544097231182748

Medientyp :

Aufsatz (Zeitschrift)

Format :

Elektronische Ressource