The introduction of more stringent standards for engine emissions requires a steady development of exhaust gas aftertreatment in addition to an optimized cylinder combustion. The reduction of the cold start phase can help significantly to lower cycle emissions. With the goal of optimizing the overall emission performance this study presents a comprehensive simulation approach. A well established 1D gas dynamics and engine simulation model is extended by three key features. These are models for combustion and pollutant production in the cylinder, models for the pollutant conversion in a catalyst, and a general species transport model. This allows to consider an arbitrary number of chemical species and reactions in the entire system. Results from engine simulations for different load conditions are compared to experimental data, pollutant traces during the high pressure phase are simulated, validation calculations of the catalyst model are performed and the catalyst efficiency during a drive cycle is predicted. The results show how critical design and operating parameters can be identified and used for further investigations.
1D Modelling of Reactive Fluid Dynamics, Cold Start Behavior of Exhaust Systems
Sae Technical Papers
SAE 2006 World Congress & Exhibition ; 2006
2006-04-03
Aufsatz (Konferenz)
Englisch
1D modelling of reactive fluid dynamics, cold start behavior of exhaust systems
Kraftfahrwesen | 2006
|EXHAUST HEATING SYSTEM TO REDUCE ENGINE COLD START EMISSIONS
Europäisches Patentamt | 2022
|Cold-start hydrocarbon collection for advanced exhaust emission control
Kraftfahrwesen | 1992
|CONTROL METHOD FOR DECREASING EXHAUST GAS DURING COLD START
Europäisches Patentamt | 2022
|Cold-Start Hydrocarbon Collection for Advanced Exhaust Emission Control
SAE Technical Papers | 1992
|