The local equivalence ratio, Φ, was measured in fuel jets using laser-induced spontaneous Raman scattering in an optical heavy duty diesel engine. The measurements were performed at 1200 rpm and quarter load (6 bar IMEP).The objective was to study factors influencing soot formation, such as gas entrainment and lift-off position, and to find correlations with engine-out particulate matter (PM) levels. The effects of nozzle hole size, injection pressure, inlet oxygen concentration, and ambient density at TDC were studied. The position of the lift–off region was determined from OH chemiluminescence images of the flame. The liquid penetration length was measured with Mie scattering to ensure that the Raman measurement was performed in the gaseous part of the spray.The local Φ value was successfully measured inside a fuel jet. A surprisingly low correlation coefficient between engine-out PM and the local Φ in the reaction zone were observed. This indicates that the soot forming rate is not the dominant factor behind the trends in engine-out PM. High correlation coefficients between PM and; portion of heat release after end of injection (EOI), engine out UHC and engine out CO all suggests that the soot oxidation process may be a more important factor.
Analysis of the Correlation Between Engine-Out Particulates and Local Φ in the Lift-Off Region of a Heavy Duty Diesel Engine Using Raman Spectroscopy
Sae Int. J. Fuels Lubr
Sae International Journal of Fuels and Lubricants
SAE World Congress & Exhibition ; 2009
Sae International Journal of Fuels and Lubricants ; 2 , 1 ; 645-660
2009-04-20
16 pages
Aufsatz (Konferenz)
Englisch
Lift-Off Length in an Optical Heavy-Duty Diesel Engine
British Library Conference Proceedings | 2015
|Lift-off length on an optical heavy-duty diesel engine
Kraftfahrwesen | 2015
|Lift-Off Length in an Optical Heavy-Duty Diesel Engine
SAE Technical Papers | 2015
|DAF Euro-4 Heavy Duty Diesel Engine with TNO EGR system and CRT Particulates Filter
SAE Technical Papers | 2001
|