Governments and regulatory agencies in North America are evaluating the nitrogen oxides (NOx) emissions of heavy-duty on-road vehicles to effectively regulate these emissions in order to improve public health and meet air quality requirements. This paper provides results from real-world Class 8 tractor-trailer truck activity and emissions data gathering conducted in the Northeast and Mid-Atlantic United States. Unlike some other areas of the United States (US), there is little available data on in-use operation and emissions performance from heavy-duty trucks in this region where temperatures can be consistently cold in winter. The purposes of this study are to add to the literature on real-world truck operation and emissions in the Northeast and Mid-Atlantic regions; to analyze the captured emissions data using recently established calculation methods implemented by the California Air Resources Board (CARB), which have not yet been applied to data from this region; and to assist air quality regulators in identifying priorities for new heavy-duty engine and vehicle emission standards and test procedures.The Northeast States for Coordinated Air Use Management (NESCAUM) conducted this project jointly with Environment and Climate Change Canada (ECCC). Given the proximity of the truck routes evaluated in this project to the Eastern Canadian provinces, the information is of interest to Canadian regulators as well. The results of this data logging and analysis showed that the CARB’s three-bin moving average window (MAW) and sum-over-sum NOx emissions calculations can be successfully applied to in-use truck data sets. However, the use of the on-board vehicle NOx sensors for data logging limited the amount of time that data were able to be captured at low loads. The active percentage time of sensors by truck was between 43% and 80% in low-load conditions (69% over all trucks). Therefore, low-load data was “backfilled” with estimated emissions values in order to compensate for the time the sensors were inactive. Backfilled data showed that a range of 21% to 67% of the mass of NOx emitted by individual trucks occurred in idle and low-load conditions combined, whereas the original data showed values between 10% and 43%. Median daily backfilled sum-over-sum NOx emissions results by truck specimen ranged from 0.32 g/bhp-hr to 0.75 g/bhp-hr in low-load conditions and from 0.02 g/bhp-hr to 0.16 g/bhp-hr in high-load conditions.As part of the study, data on over 150 vehicle and engine parameters during 100 days of truck operation were collected. This data can be used by regulators and researchers to evaluate truck emissions and operations in the region.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Heavy-Duty Diesel Truck In-Use NOx Emissions Evaluation Using On-Board Sensors


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Cooper, Coralie (Autor:in) / Humphries, Kieran (Autor:in) / Ahmadi, Mahdi (Autor:in)

    Kongress:

    Automotive Technical Papers ; 2022



    Erscheinungsdatum :

    2022-11-21




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Heavy-Duty Diesel Truck Emissions Modeling

    Abdelmegeed, Mohamed A. Elbadawy / Rakha, Hesham | Transportation Research Record | 2017


    Biodiesel Blend Emissions of a 2007 Medium Heavy Duty Diesel Truck

    McKain, David / Thompson, Gregory / Olatunji, Idowu et al. | SAE Technical Papers | 2010


    REMOTE SENSING OF HEAVY-DUTY DIESEL TRUCK N0x EMISSIONS USING TUNABLE DIODE LASERS

    Nelson, D. D. / Coordinating Research Council | British Library Conference Proceedings | 1998