This study presents experimental and numerical examination of directly injected (DI) propane and iso-octane, surrogates for liquified petroleum gas (LPG) and gasoline, respectively, at various engine like conditions with the overall objective to establish the baseline with regards to fuel delivery required for future high efficiency DI-LPG fueled heavy-duty engines. Sprays for both iso-octane and propane were characterized and the results from the optical diagnostic techniques including high-speed Schlieren and planar Mie scattering imaging were applied to differentiate the liquid-phase regions and the bulk spray phenomenon from single plume behaviors. The experimental results, coupled with high-fidelity internal nozzle-flow simulations were then used to define best practices in CFD Lagrangian spray models. Optical imaging revealed that unlike iso-octane, propane’s spray propagation was fed by its flash boiling, spray collapse, and high degree of vaporization, resulting in a direct proportionality of propane’s penetration length to temperature. These unique features of propane and its variation from iso-octane’s spray pattern, contributed to its classification as an unconventional spray. Appropriate corrections to the injection and breakup models were developed to reproduce the under-expanded jet dynamics and to mimic the flash boiling-driven spray development observed with propane sprays. The simulation results were found to be sensitive to cone and inclusion angles of the blob injector. The current work represents a first assessment of the capability of the commonly available models for engine-spray simulations and highlights the fact that, despite the reasonable agreement obtained in the fuel vapor morphology, the representation of the liquid phase lacks accuracy and requires further model development.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Bulk Spray and Individual Plume Characterization of LPG and Iso-Octane Sprays at Engine-Like Conditions


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Zdanowicz, Andrew (Autor:in) / Marchese, Anthony (Autor:in) / Windom, Bret (Autor:in) / Windell, Brye (Autor:in) / Olsen, Daniel (Autor:in) / Asztalos, Katherine (Autor:in) / Nocivelli, Lorenzo (Autor:in) / Sharma, Manav (Autor:in) / Kar, Tanmay (Autor:in)

    Kongress:

    WCX SAE World Congress Experience ; 2022



    Erscheinungsdatum :

    2022-03-29




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Bulk Spray and Individual Plume Characterization of LPG and Iso-Octane Sprays at Engine-Like Conditions

    Windell, Brye / Sharma, Manav / Nocivelli, Lorenzo et al. | British Library Conference Proceedings | 2022


    Comparison of soot models for reacting sprays in diesel engine-like conditions

    Duvvuri, Pavan Prakash / Shrivastava, Rajesh Kumar / Sreedhara, Sheshadri | SAGE Publications | 2022


    Soot Formation Modeling of n-dodecane and Diesel Sprays under Engine-Like Conditions

    Poon, Hiew Mun / Ng, Hoon Kiat / Schramm, Jesper et al. | SAE Technical Papers | 2015


    Gasohol Sprays Simulations of a Multi-Hole GDI Injector in Engine-Like Conditions

    Kalwar, Ankur / Agarwal, Avinash Kumar / Chintagunti, Sam | SAE Technical Papers | 2021


    CFD Modeling of Impinging Sprays Under Large Two-Stroke Marine Engine-Like Conditions

    Zhou, Qiyan / Lucchini, Tommaso / D'Errico, Gianluca et al. | British Library Conference Proceedings | 2022