After 39 years of continuous operation in space, the output of the Voyager 1 & 2 spacecraft Radioisotope Thermoelectric Generator (RTG) power systems has decreased to the point where managing the power margin and maintaining thermal control has become increasingly difficult. As the total power dissipation in the bus has decreased, propellant line temperatures and margin above minimum Allowable Flight Temperature (AFT) have decreased, creating risk of the hydrazine freezing (at 1.6°C). This is further complicated by the lack of existing thermal models that can be used to assess propellant tank and line temperatures. In 2014, an effort was begun to create a Voyager spacecraft thermal model for that purpose. A steady-state Thermal Desktop model has been created from scratch over the past two years. Applied Sciences Laboratory (ASL) started the initial thermal model development under contract to Jet Propulsion Laboratory (JPL). The effort relied primarily on archived manufacturing drawings, limited documentation, interviews of senior engineers who worked on the Voyager design and implementation, and the experience of the Voyager Flight Operations team. Data from the Voyager System Thermal Vacuum (STV) tests is no longer available, making it necessary to correlate the model to more recent flight data and small in-flight tests. Correlation was achieved to within ±5°C for a hot case and a cold case (both data sets from 2014). However, the flight system has very few temperature sensors directly on propellant lines. Therefore, the task remains to determine how best to use the model, in conjunction with flight data, to make sure the Voyagers can continue to fly successfully.