Abstract After deployment from a rocket, a CubeSat is detumbled using magnetorquer rods bringing the norm to the point where the reaction wheels take over to reduce the angular velocity to null. Therefore, utilizing reaction wheels for satellite detumbling at higher initial velocities is vital but they are heavy and occupy significant space on a spacecraft having challenging control. To address this challenge, this paper features a disruptive approach that conducts the control only by the PCB-integrated magnetorquers with various geometries using a diverse non-unity track width ratio. The trace widths are parametrized such that the optimal torque to power dissipation ratio is investigated. The optimizations are then simulated for various geometric distributions and validated through comprehensive measurement setups that establish a framework for selecting the best-case coil configuration according to mission requirements. The detumbling rates of multiple asymmetric coil configurations are compared with the embedded designs in published literature and state of the art. It is found that the proposed asymmetric embedded magnetorquers can detumble the vehicle at high initial angular velocities. Lastly, the simulation results of thermal analysis are validated for selecting the application-specific optimal coils configuration. At the end, the proposed system is compared with the embedded magnetorquers available in the literature and commercial attitude control systems.
CubeSats detumbling using only embedded asymmetric magnetorquers
Advances in Space Research ; 71 , 5 ; 2140-2154
2022-10-22
15 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
One-axis attitude of arbitrary satellite using magnetorquers only
Springer Verlag | 2013
|One-axis attitude of arbitrary satellite using magnetorquers only
Online Contents | 2013
|